parts wanted, steering wheel, etc

Moderator: FORDification

Post Reply
User avatar
wndsofchng06
Preferred User
Preferred User
Posts: 402
Joined: Fri Jun 01, 2012 7:41 pm
Location: Durham, NC

parts wanted, steering wheel, etc

Post by wndsofchng06 »

I am looking for 1967-1972 Ford truck parts....

I need:
passenger's side stainless missing my bump trim and bottom of the door and front fender
steering wheel (61-70 I hate the plastic look in the center of the 71-72) prefer fancy horn rings!!
rear sliding window
Grille (1970-72) ONLY This has to be in very good shape with the shine on it and I am willing to pay accordingly. My current grille is fine, but lost its luster.
original radio yes I'm a sucker for original look (will hide a new radio in the glove box)
Steering column (from a manual floor shift truck)
User avatar
gregamorton
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 935
Joined: Mon Jun 15, 2009 7:57 pm
Location: Blossom TX

Re: parts wanted, steering wheel, etc

Post by gregamorton »

where are you located? I have a super nice 70 grill but I am not shipping these any more due to damage. I am in northeast tx.
1967 mercury F350 7.3 IDI ats turbo kit c6 gear vendor overdrive 3.73s rolling on 19.5s
1971 sport custom on 1979 f350 highboy frame 460 c6 np205 dana 60s 3.54s
1974 F100 baby blue & rust 240 3 speed 3.70s sitting on the ground!
1990 F250 extended cab FI460 e40d 3.55s daily driver
Possibly looking for my next bump right now!
User avatar
Ranchero50
Moderator
Moderator
Posts: 5799
Joined: Wed Nov 08, 2006 7:02 pm
Location: Maryland, Hagerstown
Contact:

Re: parts wanted, steering wheel, etc

Post by Ranchero50 »

I have a stock '68 Ford AM radio with the bezels and knobs, speaker and mounting bars. I haven't tested it to see if it works but if it's just cosmetic, it looks fine. $60+shipping

Image

What lower trim do you have? Take a picture if possible
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue

Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
User avatar
wndsofchng06
Preferred User
Preferred User
Posts: 402
Joined: Fri Jun 01, 2012 7:41 pm
Location: Durham, NC

Re: parts wanted, steering wheel, etc

Post by wndsofchng06 »

I'm in Charlotte, NC..... so texas is a bit far....

radio looks nice.... does the 68 mount the same as the 72?

I attached a photo of the lower driver's side where trim is present, if it doesn't show large enough I will take another when it's light outside
You do not have the required permissions to view the files attached to this post.
Buckethead03
New Member
New Member
Posts: 100
Joined: Tue Oct 04, 2011 2:39 pm
Location: North Carolina

Re: parts wanted, steering wheel, etc

Post by Buckethead03 »

I have sliding rear window in good condition. I am in the statesville area if you would like to meet to take a look
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: parts wanted, steering wheel, etc

Post by basketcase0302 »

PM sent
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
User avatar
Ranchero50
Moderator
Moderator
Posts: 5799
Joined: Wed Nov 08, 2006 7:02 pm
Location: Maryland, Hagerstown
Contact:

Re: parts wanted, steering wheel, etc

Post by Ranchero50 »

wndsofchng06 wrote:I'm in Charlotte, NC..... so texas is a bit far....

radio looks nice.... does the 68 mount the same as the 72?

I attached a photo of the lower driver's side where trim is present, if it doesn't show large enough I will take another when it's light outside

Yep, radio mounts the same.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue

Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
triffecpa
New Member
New Member
Posts: 11
Joined: Sat Jun 09, 2012 12:11 am
Location: Albuquerque NM

Re: parts wanted, steering wheel, etc

Post by triffecpa »

sent you a PM about the steeringwheel in my 1970

Tracy
Post Reply