pick-u-part prices....?

[Orange Beezy]

Heck I got mine for 250.00 with all four wheels and new tires to boot. That was from Tony's truck dismantlers in Irwindale,CA.

[quantumleap]

i took the printed add of the front end..complete truck-$279.99+tax and $25 core..it was right there on the floor in front of the dumspter and i asked the manager and showed him the printed add..he replied "that only includes the front end fenders,hood,grill,bumper...all in all with 50% off they still wanted $300 so i watched the giant tractor pick it up and drag it to the dumpster to be turned into $20bucks of scrap:x ..WHAT A WASTE...

[quantumleap]

besides '75 front end=$500
and '03 crown vic=$500+=or-
you do the math

[1971ford]

I got my disk brake setup for $60 on craigslist. Definately check craigslist, post a wanted ad, or just look for any dentside f100 being parted out... you'll find something, lower than $600 atleast!

[quantumleap]

just gonna hold out maybe for the crown vic swap...if all goes well with the help of marz68....
i dont just need the discs...i need the whole steering linkage too all the way to the pitman arm...so id like the whole front clip

[BiggDogg]

I got my disk brake setup for $60 on craigslist. Definately check craigslist, post a wanted ad, or just look for any dentside f100 being parted out... you'll find something, lower than $600 atleast!

Hey Ryan, post a craigslist disc break setup wanted ad for me (make sure its 8 lug), make a road trip to SoCal, install it in my truck, and I'll give you $60

[1971ford]

I got my disk brake setup for $60 on craigslist. Definately check craigslist, post a wanted ad, or just look for any dentside f100 being parted out... you'll find something, lower than $600 atleast!

Hey Ryan, post a craigslist disc break setup wanted ad for me (make sure its 8 lug), make a road trip to SoCal, install it in my truck, and I'll give you $60

Even better.
Since no one wants my beautiful 2wd chassis, I'm going to part it out, and it has a f350 (same as f250 but i beam pivot bushings are slightly larger and has 1' kingpins) dual piston disc brake front end on it. It has all been stripped and POR-15'd.
Yours for $60
Come get it
And yes i am serious, if you want to make a bit of a road trip

[marz68]

just gonna hold out maybe for the crown vic swap...if all goes well with the help of marz68....
i dont just need the discs...i need the whole steering linkage too all the way to the pitman arm...so id like the whole front clip

I saw a crow Vic at pic-u-part Saturday but it's missing the rack,one spindle both rotors both calipers and they want $250 as is that's including the 50% off and it's already taken off the car just sitting in the floor.

[69rangerf100]

i snagged my 73 setup for $115 so yes that a rip off

[JG F100]

sometimes you get good deals at pick a part, just depends whos at the counter. I've bought items at one price gone back to buy some of the same and rung up at higher price! Now I take cell phone picks of the price sheets of stuff I may want just in case although you may have better luck finding a CV front end from regular salvage yard. I picked the car, told them what I wanted, they unbolted it and loaded it up for me.

[quantumleap]

just gonna hold out maybe for the crown vic swap...if all goes well with the help of marz68....
i dont just need the discs...i need the whole steering linkage too all the way to the pitman arm...so id like the whole front clip

I saw a crow Vic at pic-u-part Saturday but it's missing the rack,one spindle both rotors both calipers and they want $250 as is that's including the 50% off and it's already taken off the car just sitting in the floor.[/quote

are you looking in the primo lot or the regular lot?..too bad sale was over yesterday..never made it over there but ill deff keep my eyes open for that next time around..good looking out marz

[quantumleap]

sometimes you get good deals at pick a part, just depends whos at the counter. I've bought items at one price gone back to buy some of the same and rung up at higher price! Now I take cell phone picks of the price sheets of stuff I may want just in case although you may have better luck finding a CV front end from regular salvage yard. I picked the car, told them what I wanted, they unbolted it and loaded it up for me.

they pulled the whole ifs for you? u pay extras for the red carpet treatment or what? nice job id be extactic if everyone treated part hunters that way

[eggman918]

At the local pick ur part there only 2 people I will deal with on big purchases,it all depends on how they right it up.
I have been buying from them for 20 years so employees come and go it is time well spent cultivating relationship with someone

[marz68]

just gonna hold out maybe for the crown vic swap...if all goes well with the help of marz68....
i dont just need the discs...i need the whole steering linkage too all the way to the pitman arm...so id like the whole front clip

I saw a crow Vic at pic-u-part Saturday but it's missing the rack,one spindle both rotors both calipers and they want $250 as is that's including the 50% off and it's already taken off the car just sitting in the floor.[/quote

are you looking in the primo lot or the regular lot?..too bad sale was over yesterday..never made it over there but ill deff keep my eyes open for that next time around..good looking out marz

It's in the regular area...to bad the price will double now that the discount is no more.

[flyboy71]

I got my 79 full front end at the they-pull-it with all the bolts and prop valve for $250. Its for sale now since I wont need it since I picked up my Crown Vic IFS.