mc brake lines

Suspension, steering, brakes, wheels & tires

Moderator: FORDification

Post Reply
User avatar
peanutman
Blue Oval Fan
Blue Oval Fan
Posts: 507
Joined: Mon Sep 24, 2007 12:24 pm
Location: Irving, TX

mc brake lines

Post by peanutman »

The brake lines coming off my mc, the curly ones have a clip on bracket right in the middle of the run but i don't see where it would bolt to. Anyone know.
Nausea
New Member
New Member
Posts: 114
Joined: Tue Jan 16, 2007 10:51 pm
Location: Texas, Plano

re: mc brake lines

Post by Nausea »

From what I've seen, there's a bracket attached to the lines that bolts to the top of the steering box... unless your prop valve is already mounted there.
PO took it loose on my 72 and I could never get it to bolt back on properly... just there as vibration damper for the lines.
-------------------------------------------
'72 F250 Ranger
Disk brakes, PS/PB, 360 2bbl
Current condition : beloved 'beater'
'70 F250 Camper Special
Currently in the shop, totally stripped
User avatar
peanutman
Blue Oval Fan
Blue Oval Fan
Posts: 507
Joined: Mon Sep 24, 2007 12:24 pm
Location: Irving, TX

Post by peanutman »

That's what i though from pics iv'e seen. My steering box has been changed from bendix manual to saginaw power. There is a brachet on steering box but no way i could get lines to stretch to reach it. I will just leave it alone.
Previous box must have sat a lot closer to lines.
Post Reply