Independent rear suspension-Corvette
Moderator: FORDification
- hawkeye30248
- New Member
- Posts: 4
- Joined: Tue Jun 19, 2007 5:17 pm
- Location: Locust Grove, Georgia
- Contact:
Independent rear suspension-Corvette
Does anyone know if the Corvette IRS kits will work on my '68 Custom? If not, do you know what will? Any help would be great.
- convincor
- 100% FORDified!
- Posts: 1511
- Joined: Wed Sep 12, 2007 5:05 am
- Location: Connecticut
re: Independent rear suspension-Corvette
Why not t-bird, Mustang Cobra, mark VIII? There's a lot more of them out there vs the vette parts. And it's Ford
Have it in my Cobra-

http://parts.factoryfive.com/newcatalog ... es/irs.jpg
Have it in my Cobra-

http://parts.factoryfive.com/newcatalog ... es/irs.jpg
68 Custom Cab Shorty, 390, C6, 9"-3.50:1 Currie T/L
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
- marz68
- Blue Oval Guru
- Posts: 1387
- Joined: Sat Dec 03, 2005 2:25 am
- Location: California, Northridge
- Contact:
I would keep it all FORD and select a setup that's not going to cost a lot to buy. Check out this web site. http://team321.com/truckirs/truckirs.html
- hawkeye30248
- New Member
- Posts: 4
- Joined: Tue Jun 19, 2007 5:17 pm
- Location: Locust Grove, Georgia
- Contact:
re: Independent rear suspension-Corvette
marz68, thanks for the great info. I should be able to locate a donor rearend without much problem. I'm in the process of a complete frame off restoration and want to do it right the first time.
- marz68
- Blue Oval Guru
- Posts: 1387
- Joined: Sat Dec 03, 2005 2:25 am
- Location: California, Northridge
- Contact:
- marz68
- Blue Oval Guru
- Posts: 1387
- Joined: Sat Dec 03, 2005 2:25 am
- Location: California, Northridge
- Contact:
- 71PA_Highboy
- Blue Oval Fanatic
- Posts: 923
- Joined: Tue May 23, 2006 11:32 am
- Location: Denver of the East
re: Independent rear suspension-Corvette
Mars,
Come on up to my house... you can pull the one out of my 94 Mark VIII...
Good luck!
Eric
Come on up to my house... you can pull the one out of my 94 Mark VIII...
Good luck!
Eric
Got Ford?
2 EarlyBroncos (68,69)
2 Classic Mustangs (69,70)
1 F250 4x4 (71) - OB - 360, NP435, D24, HPD60 4.10, D60,
1 94 Ranger, 2.3, 5spd
1 Lincoln Mark VIII
2 EarlyBroncos (68,69)
2 Classic Mustangs (69,70)
1 F250 4x4 (71) - OB - 360, NP435, D24, HPD60 4.10, D60,
1 94 Ranger, 2.3, 5spd
1 Lincoln Mark VIII
- hawkeye30248
- New Member
- Posts: 4
- Joined: Tue Jun 19, 2007 5:17 pm
- Location: Locust Grove, Georgia
- Contact:
re: Independent rear suspension-Corvette
Seems like all the parts I'm looking for are way up north somewhere!
Must be like heaven up there!
Must be like heaven up there!
- convincor
- 100% FORDified!
- Posts: 1511
- Joined: Wed Sep 12, 2007 5:05 am
- Location: Connecticut
Re: re: Independent rear suspension-Corvette
More like hell if your look'n for bump parts or any older body parts.hawkeye30248 wrote:Seems like all the parts I'm looking for are way up north somewhere!
Must be like heaven up there!
Winters have taken there toll.....
68 Custom Cab Shorty, 390, C6, 9"-3.50:1 Currie T/L
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
-
- Preferred User
- Posts: 275
- Joined: Mon Apr 23, 2007 8:21 am
- Location: New Jersey
re: Independent rear suspension-Corvette
ok you guys got to stop this..you all had me outside eyeing up the rear in my 01 lincoln ls 

Tony
bumpless but still diggin them....
bumpless but still diggin them....