I think I am starting to narrow it down but would appreciate some input from those who know more than me (umm thats just about anyone).
VIN on drivers door F10AKA61661 that is a 2wd with 6 cyc built in Dec of 66?
VIN on passenger frame rail F11YKG732 that is a 4wd with 360 built in Oct of 69?
Code on intake is C6AE 9425-G.
Where do I find code on heads?
What about the block without having it out?
Ok the beast, what is it worth? I already bought it, just want to make sure did not get screwed to bad. No bed, cab is fairly solid. Some rust passenger floor board, it will need to be replaced. The rail near back of cab is rusted on both sides but solid rest way across. Cab mount at front of driver door is rusted through. Passenger inner fender well is a gonner. Bit of rust both lower corners of passenger door and spot at bottom of passenger fender where meets door. Some sort of lift that includes blocks and ******* pack in rear (unless these came with 11 leafs) and body lift in front. Set of 33 Coopers with less than quarter tread on crome rims that REALLY need polish. Warn lock outs. No power steering or AC. 4wd works and she runs. In fact I drove her about 15 miles or so home although I forgot to make sure she had enough coolant so got a bit warm. I don't think the grill is 70? Or maybe the visors for that matter? Have pics of all this same location as link below.
Sorry to vomit all over on my first post but kind of excited about this truck
http://farm3.static.flickr.com/2397/153 ... d6a231.jpg
Lots of nice folks and good info here.Looks like you got a good start.
.
