M/C pushrod length differences?
Moderator: FORDification
-
Redcap
- Blue Oval Fanatic
- Posts: 947
- Joined: Mon Dec 20, 2004 10:29 pm
- Location: Washington, Centralia
- Contact:
M/C pushrod length differences?
A friend robbed a power master cylinder for me today at the junkyard, but since he is a IH guy...he has no clue out of what year truck. What are the differences in pushrod length? I was thinking about slamming this sucker into my truck today...
-
FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: M/C pushrod length differences?
The only '67-'79 MC that will cause any problems is the '67 version. It's got a longer pushrod due do a difference in the clutch/brake pedal bracket (the pivot point is farther back). Anything else will work just fine.
Read this thread for more info on that:
http://fordification.com/forum/viewtopic.php?t=3406
Read this thread for more info on that:
http://fordification.com/forum/viewtopic.php?t=3406
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-
Redcap
- Blue Oval Fanatic
- Posts: 947
- Joined: Mon Dec 20, 2004 10:29 pm
- Location: Washington, Centralia
- Contact:
re: M/C pushrod length differences?
Thanks Keith!
Good thing I have part of a '68 truck left around!
Good thing I have part of a '68 truck left around!