disc convert question

convincor · Post by **convincor** » Wed Nov 21, 2007 4:57 pm

So, I'm doing a 68 truck, i can get my hands on a set of 77 spindles.
If I where to buy 3" drop beams I'd get them for 77. Correct?
Then use 77 outer tie rod ends??

fordman · Post by **fordman** » Wed Nov 21, 2007 6:57 pm

yes because of the matching king pin diameter.

http://www.fordification.com/Ibeams&spindles.htm

convincor · Post by **convincor** » Wed Nov 21, 2007 7:33 pm

If I where to not use drop beams and replace the bushings could i use my old beams??

fordman · Post by **fordman** » Wed Nov 21, 2007 8:01 pm

only if the king pin diameters were the same.

convincor · Post by **convincor** » Wed Nov 21, 2007 8:21 pm

fordman, Got the drip rail/linkage/hump today.
Thanks again.
Now find me a complete disc brake set-up so I can send you some more money..

fordman · Post by **fordman** » Wed Nov 21, 2007 8:27 pm

that is easy the shipping sucks though but i can do it. actually i know where one or maybe two are sitting right now 73-77 trucks i also know of some f250 disc set ups. in the same place.

basketcase0302 · Post by **basketcase0302** » Wed Nov 21, 2007 9:17 pm

convincor,

Here ya' go

http://www.fordification.com/forum/view ... hp?t=26754
Wish I were closer as i have a good set of discs for sale.
http://www.fordification.com/forum/view ... hp?t=26564
Jeff

convincor · Post by **convincor** » Wed Nov 21, 2007 9:33 pm

FLA.=long ride for brakes.
Working with a guy now in PA who may be interested in the 460 I pulled from my truck.
He know's of a few good bone yards. And there's also another guy in PA who has a bench seat and drive shaft. So it may be worth a road trip down there.....

The FORDification.com Forums

disc convert question

disc convert question

re: disc convert question

re: disc convert question