question for power swap on a 67 4x4 250 steering

Manny · Post by **Manny** » Wed Oct 04, 2006 7:42 pm

okay i am new here so just bear with me. now my 67' has manual steering on it i would like power -specs for my rig

360 fe
4x4 dana 44 3/4 ton closed knuckle axle
i have the brackets and the pump for the engine just curious about the best way to convert the box, and linkage to power. So can anybody help out or could you point me to another thread about this subject please? thanks for your assistance.

Post by **FORDification** » Wed Oct 04, 2006 9:20 pm

I was researching this out a while back, and posted the following information. I haven't gotten back to it yet though, so there's no follow-up:

http://www.fordification.com/powersteer ... 00-4WD.htm

72hiboy4x4 · Post by **72hiboy4x4** » Wed Oct 04, 2006 9:51 pm

this one is for the 3/4 ton trucks. One of the things I plan to get done to my truck (someday).

http://www.fordification.com/powersteering4wd.htm

Manny · Post by **Manny** » Thu Oct 05, 2006 8:04 pm

thanks for the information that should help steer me in the right direction

The FORDification.com Forums

question for power swap on a 67 4x4 250 steering

question for power swap on a 67 4x4 250 steering

re: question for power swap on a 67 4x4 250 steering

re: question for power swap on a 67 4x4 250 steering

re: question for power swap on a 67 4x4 250 steering