anti-rattle clips

Jari · Post by **Jari** » Sat Sep 16, 2006 6:53 pm

Does anybody have a picture of how the disc brake anti-rattle clips install. I didn't have the clips and with new pads I ordered them but can't figure out how they are installed. New pads didn't rattle even without the clips but now after 1000 mls or so they are getting pretty noisy.

Thanks,
Jari

68F250 · Post by **68F250** » Tue Sep 19, 2006 11:05 pm

Clips? There's springs.

Jari · Post by **Jari** » Wed Sep 20, 2006 9:05 pm

Yes, on floating calipers there are the springs. On sliding calipers with single pistons there are these clips. The brakes are from F150.

Thanks,
Jari

68F250 · Post by **68F250** » Wed Sep 20, 2006 11:07 pm

Oh, ok. Why didnÃ¢â‚¬â„¢t you say so.

These two scans out of the Peterson book show it best. The clips go on the lower end of the inner pads.

Jari · Post by **Jari** » Thu Sep 21, 2006 6:10 am

Ok, now I see how. Thanks a lot.

Jari