Hi All,
My truck has the nifty little light that clips onto the cigar lighter. Unfortunately I cannot figure out how it clips to the cigar lighter. If anyone has a picture of how this setup goes together I would really appreciate it.
Thanks,
DC
cigar lighter light
Moderator: FORDification
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: cigar lighter light
Gotta be aftermarket as I'd never seen one on the bumps in all these years?"dtcohen"Hi All,
My truck has the nifty little light that clips onto the cigar lighter. Unfortunately I cannot figure out how it clips to the cigar lighter. If anyone has a picture of how this setup goes together I would really appreciate it.
Thanks,
DC
I have an obsolete OEM Ford glove box light here. It has a metal housing and clips into the "cardboard" glove box-but...even it was from the dent era, (but will fit into our bump glove box.
Got a pic of this light-as i think it a pretty kool idea.
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
- New Member
- Posts: 96
- Joined: Mon Aug 07, 2017 11:09 am
Re: cigar lighter light
AIt is a factory piece. Maybe it was optional? It is on the 1968 wiring diagrams. There is even a part number. C3TB-15072-A lamp assy. It looks like the light is supposed to clip into some slots on the outer portion of the cigar lighter. I think my cigar lighter has been replaced with one that did not have the slots. A drill bit and some work with a die grinder and I now have the slot to clip the light to. Here is a picture (not mine) of the light clipped to the cigar lighter.
http://www.fordification.com/forum/down ... &mode=view
http://www.fordification.com/forum/down ... &mode=view
- The Bandit
- New Member
- Posts: 177
- Joined: Sat Dec 01, 2018 12:49 pm
- Location: Salisbury NC
Re: cigar lighter light
Its probably a factory thing as it's just a aux light so you can see where to put the lighter back into when it's dark in the truck. Not going to say it wasn't an option on your truck but it was for sure an option later on as I've seen them before on newer cars when they still had cig lighters in them.dtcohen wrote:AIt is a factory piece. Maybe it was optional? It is on the 1968 wiring diagrams. There is even a part number. C3TB-15072-A lamp assy. It looks like the light is supposed to clip into some slots on the outer portion of the cigar lighter. I think my cigar lighter has been replaced with one that did not have the slots. A drill bit and some work with a die grinder and I now have the slot to clip the light to. Here is a picture (not mine) of the light clipped to the cigar lighter.
http://www.fordification.com/forum/down ... &mode=view
"Don't believe everything you see and read on the internet." Abe Lincoln
1972 F100 custom SWB 302/C4 Auto PS No AC Wimbledon white and rusty..
1972 F100 custom SWB 302/C4 Auto PS No AC Wimbledon white and rusty..
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: cigar lighter light
Kool option I'd never seen before!
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
- Preferred User
- Posts: 279
- Joined: Wed Feb 08, 2017 7:58 pm
- Location: Sunland, CA
Re: cigar lighter light
My 70 CS has that.
1970 F250 460 C6 - Project - Currently not running.
1999 Dodge Durango SLT 4 x 4 5.9 Magnum -not running.
1999 Toyota Corolla - Daily Driver.
https://fordification.com/forum/app.php ... y/album/43
1999 Dodge Durango SLT 4 x 4 5.9 Magnum -not running.
1999 Toyota Corolla - Daily Driver.
https://fordification.com/forum/app.php ... y/album/43