1967 f-600 brake question

[tex1264]

anybody know where to get a brake system diagram for a big truck? thanks kevin

[FORDification]

They're in the '67 shop manuals. What specifically do you need? I could scan that portion.

[tex1264]

the booster under cab shot,mastercylinder, hose routing for vaccum booster also under cab, or any thing along these lines thanks kevin

[tex1264]

I figured out the brakes on this f-600 i think! someone has removed a breather hose and filter that runs from mastercylinder to up behind the seat ,i guess to keep out the dust and i found a couple split vaccum hoses,from mastercylinder to the booster,which on this truck the hoses are about the size of the heaterhoses,3/4'' or 1'' vaccum hoses are huge, might be easy fix, has anyone got a behind the seat shot of a 67 ford f-600? this breather hose mounts on or around the seat gas tank any help will help Thanks Kevin

[FORDification]

There are 23 pages of air-brake stuff in the '67 catalog, but I don't think any of that info is going to help you on component layout. However, there are several pages in the Master Parts Catalog which should be helpful. I'm scanning those right now and will post them shortly. Stand by.

[FORDification]

Well shoot! I just scanned six exploded-view diagrams and can't seem to get them to upload to the site. I'll keep trying.

[FORDification]

OK Kevin, I finally got the scans posted. Go to the following page:

http://www.fordification.com/schematics03.htm

There's a new section down at the bottom of that page with F600 brake system diagrams. I believe what you're looking for is in the last one:

http://www.fordification.com/images/sch ... 06_MPC.gif