stock wheel lug pattern

[69f-100]

how do i tell what my stock wheel lug pattern is on my 69 2wd? i was just curious to i coul look around at the different rims that are avalible...

[forrestbump]

5 on 5-1/2" is your F100's lug pattern.

[69f-100]

thanks.. are rims for that hard to find?

[fordman]

factory ones arent that hard to find. aluminum ones that you like may be harder to find.

[69f-100]

i kinda like these two http://www.summitracing.com/parts/CRR-08750/ or http://www.summitracing.com/parts/CRR-08850/ would any of these two work?

[forrestbump]

If you click the "Check Application" button, you'll see that these wheels require spacers to fit drum brake Ford trucks and they will NOT fit '73 up which means if you're planning on swapping to disc brakes or already have disc brakes, no dice, they will NOT fit.

Now if you're OK with spacers and plan on keeping drum brakes on all four corners then get em and enjoy.

[69f-100]

Yes I'm keeping the drum brakes. I take it I can get the spacers from summit? Sorry I'm not at home to look.

[forrestbump]

The wheel add says lug nuts ARE included but goes on to say that 1/2" thick spacers plus 1" length lug nuts are required? HUH?... seems confusing...

I'd suggest calling or emailing Summit to verify all facts about EXACTLY what is required for these wheels to fit your Bump PROPERLY before you buy them.

[69f-100]

thank you for the info i appreciate it..

[forrestbump]

thank you for the info i appreciate it..

You're Welcome!! That's why we're here.

Always remember to also thank Keith (our Founder and Spiritual Leader) and all the Mods here too as it's because of them that this wonderful site exists, works as well as it does and gives us the platform to help each other out!