I need the diameter of axle centering pin bolt

Quick69 · Post by **Quick69** » Wed Jul 14, 2010 9:04 am

Is it 5/16 or 3/8's

I am buying pinion angle shims and need longer pins

thanks

fordman · Post by **fordman** » Wed Jul 14, 2010 3:25 pm

5/16ths

Quick69 · Post by **Quick69** » Wed Jul 14, 2010 3:50 pm

Well then I'm confused, I just talked to the guy at the 4x4 place and he said it was 3/8's ?????

fordman · Post by **fordman** » Wed Jul 14, 2010 6:51 pm

Quick69 wrote:Is it 5/16 or 3/8's

I am buying pinion angle shims and need longer pins

thanks

i was speaking of 2wd. F100 4wd. that is the sizes i have taken out before.

Quick69 · Post by **Quick69** » Wed Jul 14, 2010 8:32 pm

I replaced mine tonight and they were 3/8's

fordman · Post by **fordman** » Thu Jul 15, 2010 2:05 am

looks like i was wrong. i went out and looked. mine are 3.8 also. i'm sorry about that. i was going from memory. and it was the wrong memory i had.

Quick69 · Post by **Quick69** » Thu Jul 15, 2010 8:20 am

no problem at all

The FORDification.com Forums