1970 F100 Front Frame Horn Dimensions

[whatabudro]

I hope this is the correct section for this post?

I just got the front end stripped off my new bumpside and discovered the front frame horns are tweaked from an accident at some point in its life. I was hoping one of the members could provide me with some dimensions of a non-altered frame. I have access to a frame tugger and would like to get this resolved before I spend any more time or money on this truck. The damage all appears to be forward of the front cross member. I am mainly looking for the outside width of the frame rails, in a few locations, forward of the front cross member.

Thanks,

Bryan

[fordman]

i dont have a truck here to measure. but you can measure the outside fo the frame further back. it is the same all the way to the rear.

[whatabudro]

Thanks for the quick reply.

[JG F100]

click on page 4

http://www.fordification.com/tech/bodybuilder70.htm

[mrsnicks]

I'd just line up the front bumper and bend/pull until you can put all the bolts in.

[whatabudro]

click on page 4

http://www.fordification.com/tech/bodybuilder70.htm

THANK YOU SIR!