Mustang II

[fuzzier1]

OK first off I am waiting semipatiently ( ) for Marz's front bolt on suspension but did anyone see Spikes TrucksTV a couple of weeks ago where they were talking about and showed the Paul Horton's Welder series mustang II front suspension? Paul Horton sends the kit out as a flat stock with laser cut slits where you bend the crossmembers and then weld them up and then weld them into the frame. Pretty cool and affordable. I know and understand that this is JUST the crossmember section but... You can see them here http://www.welderseries.com/catalog/ind ... Path=22_25 What do you guys think?

Fuzz

P.S. TrucksTV also did a triangulated four link from the same guys on the same ( GASP) 49 Chevy pickup. It is coming out pretty cool so far.

[fuzzier1]

Has anyone checked these out and does anyone have an opinion on these?

Fuzz

[cep62]

I saw the tv show and it looked like a neat idea.
But our frames might be wider. ?

[texrodder]

Should work fine,the 60" track width kit is very close to our trucks track width,our frames are 34" wide so really wouldnt be a problem.I wouldnt be afraid to try one.