Messed up Rear Brakes

fordboy69 · Post by **fordboy69** » Tue Oct 06, 2009 3:17 pm

I'm redoing the rear brakes on my 69 f100. One side didn't have anything except the wheel cylinder and on the other side most of the springs and adjuster are broken. Does anyone have the rear brake diagram that shows where everthing goes? Also there is a knob just above the wheel cylinder that some springs hook up to that is sheared off. Can you change this or what? Thanks.

fordboy69 · Post by **fordboy69** » Tue Oct 06, 2009 3:23 pm

I ordered the right springs but I just started putting things together. Heres what I have on the other side.

SteveC · Post by **SteveC** » Tue Oct 06, 2009 3:23 pm

http://www.fordification.com/tech/schematics_b.htm there here for the diagrams
and i believe and don't quote me on it but i think you need to change the backing plate

Post by **FORDification** » Tue Oct 06, 2009 7:09 pm

As for that sheared-off pin...yes, you're going to have to replace that backing plate. That pin cannot be removed/replaced.

fordboy69 · Post by **fordboy69** » Tue Oct 06, 2009 7:14 pm

Ahh there we go thanks for the diagram. So would I have to change the anchor pin plate since the knob at the end is sheared off?

Post by **FORDification** » Tue Oct 06, 2009 7:27 pm

FORDification wrote:...As for that sheared-off pin...yes, you're going to have to replace that backing plate. That pin cannot be removed/replaced.

fordboy69 · Post by **fordboy69** » Tue Oct 06, 2009 7:33 pm

Sorry I didn't see that writing under the diagram. Thanks for the help.

fordboy69 · Post by **fordboy69** » Wed Oct 07, 2009 7:58 pm

I have a f250 parts truck. Would brake components from a 3/4 ton work on my f100?

Post by **FORDification** » Wed Oct 07, 2009 8:52 pm

No, they're completely different.

flyboy2610 · Post by **flyboy2610** » Wed Oct 07, 2009 9:26 pm

Fordboy, where do you live?
I have a trailer made from a F100, but my truck is an F250. I'd be willing to swap rear ends with you if you aren't too far.

fordboy69 · Post by **fordboy69** » Thu Oct 08, 2009 3:26 pm

Thanks but Im in Winnipeg, Manitoba. I might be able to get some parts this Saturday I dont know yet. That sucks that the f250 is different I thought they might be.

flyboy2610 · Post by **flyboy2610** » Thu Oct 08, 2009 5:30 pm

fordboy69 wrote:Thanks but Im in Winnipeg, Manitoba.

Yea, that's a bit far. Good luck with your parts!

fordman · Post by **fordman** » Thu Oct 08, 2009 7:16 pm

i've been to manitoba when i was a kid. i have proof someplace.

fordboy69 · Post by **fordboy69** » Thu Oct 08, 2009 9:54 pm

Where in manitoba did you visit?

fordman · Post by **fordman** » Thu Oct 08, 2009 10:41 pm

i dont remember i have a picture of me hanging from a sign that says welcome to manitoba. it was just voer the border from norht dakota. i will try and find the picture.

The FORDification.com Forums

Messed up Rear Brakes

Messed up Rear Brakes

Re: Messed up Rear Brakes

Re: Messed up Rear Brakes

Re: Messed up Rear Brakes

Re: Messed up Rear Brakes

Re: Messed up Rear Brakes

Re: Messed up Rear Brakes

Re: Messed up Rear Brakes

Re: Messed up Rear Brakes

Re: Messed up Rear Brakes

Re: Messed up Rear Brakes

Re: Messed up Rear Brakes

Re: Messed up Rear Brakes

Re: Messed up Rear Brakes

Re: Messed up Rear Brakes