New Exhaust System?

rubiranch · Post by **rubiranch** » Tue Jul 29, 2008 7:01 pm

BiggDogg wrote:Hey Rubiranch, any chance you can get a video or soundclip for us and post it here http://www.fordification.com/forum/view ... &&start=45

as soon as I fugure out how to

averagef250 · Post by **averagef250** » Thu Jul 31, 2008 8:04 pm

If you need any bends my shop's in wilsonville and I have a bender.

dablack00 · Post by **dablack00** » Fri Aug 01, 2008 6:11 am

Corbin,

Keep us up to date on how the LMC kit works out.

fomocoguy · Post by **fomocoguy** » Fri Aug 01, 2008 8:11 am

averagef250 wrote:If you need any bends my shop's in wilsonville and I have a bender.

Jeez I wish I had a buddy with a shop like yours...

green1970 · Post by **green1970** » Fri Aug 01, 2008 8:25 am

that is high... i payed $260 for mine from the manifolds back all the way out the back with flow master mufflers and 2 1/2 in. pipes.

Negative · Post by **Negative** » Fri Aug 01, 2008 1:31 pm

Summit is where I got mine (pics coming I am lazy) headers (Hooker competition street) were $156 for the pair. Hooker competition street 2.5 pipes, and 2 red hot glasspacks for $182.

The pipes are designed to fit headers or manifolds on the truck, take that out and I only paid $182 bucks. True dual and sounds amazing!

averagef250 · Post by **averagef250** » Fri Aug 01, 2008 3:56 pm

fomocoguy wrote:
averagef250 wrote:If you need any bends my shop's in wilsonville and I have a bender.
Jeez I wish I had a buddy with a shop like yours...

What? You don't have benders, mills, lathes, hoists, cranes, torches, welders and blasters?

More machines just means more things to trip over. My 30X40 usually looks like a bomb went off with all the crap I have packed inside.

green68250 · Post by **green68250** » Mon Aug 04, 2008 9:35 am

What does it mean when UPS says there is an exception in your tracking information. They said the package was forwarded to the facility in the destination city. What does that mean? Do I have to go get my exhaust at the post office now? I wish they would explain these things better.

Corbin

green68250 · Post by **green68250** » Mon Aug 04, 2008 11:36 pm

Never mind. I got my new exhaust today and got it installed in about an hour or so. Got enough of the truck together to run it and found out that the rotor spins counter clockwise so I had to redo the firing order. Then I got her running an found out that my valve covers are leaking so I have to pull those and re-seal them. Should have the truck on the road by Wednesday. I'll get some pics of the new system up here soon. Its a pretty good deal and sounds pretty good to. I had to do a little customization because one of the pipes was too long but at least is was too long and not too short. I'll keep you posted.

Corbin

The FORDification.com Forums

New Exhaust System?

Re: re: New Exhaust System?

re: New Exhaust System?

re: New Exhaust System?

re: New Exhaust System?