A good place to buy E-brake cables??

Suspension, steering, brakes, wheels & tires

Moderator: FORDification

Post Reply
User avatar
nytreeman
New Member
New Member
Posts: 66
Joined: Sat Feb 02, 2008 2:49 pm
Location: Central NY

A good place to buy E-brake cables??

Post by nytreeman »

Been looking for a place to buy brake cables for my '67 f-350 and '73 high-boy and so far no luck :( anyone know of a good place?
~ Don

So much rust ... so little time

my gallery- http://www.fordification.com/galleries/ ... ?cat=10447
User avatar
nytreeman
New Member
New Member
Posts: 66
Joined: Sat Feb 02, 2008 2:49 pm
Location: Central NY

re: A good place to buy E-brake cables??

Post by nytreeman »

my 67 f350 is a long wheelbase truck too 157" I believe so probably be even harder to find,the main cable I need is the front
~ Don

So much rust ... so little time

my gallery- http://www.fordification.com/galleries/ ... ?cat=10447
User avatar
jor
Blue Oval Fan
Blue Oval Fan
Posts: 682
Joined: Fri Jul 23, 2004 9:28 am
Location: Arizona, Tucson

re: A good place to buy E-brake cables??

Post by jor »

Try Dennis Carpenter. They list the 67 F-250 and a couple of parts for the F-350. I checked LMC and Mac's but neither shows the 350 nor the 67 model. I wonder if the dealer might still stock it if it carried over for a number of years. Good luck.
jor
Nausea
New Member
New Member
Posts: 114
Joined: Tue Jan 16, 2007 10:51 pm
Location: Texas, Plano

re: A good place to buy E-brake cables??

Post by Nausea »

I had trouble finding one for 72 CS. Think ended up going with Green Sales. Finding 'em with that 45 degree shoe can be a challenge.
-------------------------------------------
'72 F250 Ranger
Disk brakes, PS/PB, 360 2bbl
Current condition : beloved 'beater'
'70 F250 Camper Special
Currently in the shop, totally stripped
User avatar
FLATBEDFORD
100% FORDified!
100% FORDified!
Posts: 1818
Joined: Sat Feb 18, 2006 1:34 pm
Location: New York, Crugers
Contact:

Post by FLATBEDFORD »

I have owned an '83 F250, I have a '96 f250, and I've also spent some time messing with an '86 F350. As far as i could see, From '67-96, there are a lot of parts that look the same. If you can't find parts for the old trucks, try from a newer one, especially if your parts guy will let you bring them back if they don't work.
Steve

1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013

My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
User avatar
nytreeman
New Member
New Member
Posts: 66
Joined: Sat Feb 02, 2008 2:49 pm
Location: Central NY

re: A good place to buy E-brake cables??

Post by nytreeman »

Yes I just talked to him and only thing he could come up with was for a 75 with a 160 - 166" wheelbase so I had him order it have to wait and see if its the same hookup/ends or what
~ Don

So much rust ... so little time

my gallery- http://www.fordification.com/galleries/ ... ?cat=10447
User avatar
AlleyCat
Blue Oval Guru
Blue Oval Guru
Posts: 1283
Joined: Sat May 12, 2007 8:28 pm
Location: Pennsylvania, Pittsburgh

re: A good place to buy E-brake cables??

Post by AlleyCat »

Don, have you tried NAPA? They have always amazed me with the stuff they have listings for that nobody else can find.
Clay

72 F100 4x2 Custom,289, C4 " Slow Ride "
70 F250 4x2 Ranger XLT , 360, C6 "B52 - IV"
96 F150 4x2 XL, 300, E4OD, daily driver

" Professional Wrecker Operators - We Pull for America "
User avatar
Wes
Blue Oval Fan
Blue Oval Fan
Posts: 732
Joined: Fri Oct 21, 2005 6:04 pm
Location: California, Southern& Lake Havasu Az

Post by Wes »

Had my 67 High boy cables made at inline tube in Michigan .Removed all the old cables I wanted made and sent them in as samples, received my new factory fitting cable in under 2 weeks. Only needed the rear 2 was less than $100.00

http://www.inlinetube.com/
Wes

http://www.fordification.com/galleries/ ... ?cat=10402
67 F250 High boy
69 Bronco

If you can't see fit to stand behind Our Troops...Please stand in front of them :)
fitzwell
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 779
Joined: Wed May 10, 2006 2:16 pm
Location: East of a rock, west of a hard place

re: A good place to buy E-brake cables??

Post by fitzwell »

x2 on Napa. I had to get the front cable from ford, but the rears were available as a special order.
As a metter of fact, i AM trying to keep up with the Jones'
Driving like Parnelli, Drinkin' like George
-------------------------------------------------------
User avatar
nytreeman
New Member
New Member
Posts: 66
Joined: Sat Feb 02, 2008 2:49 pm
Location: Central NY

Re: re: A good place to buy E-brake cables??

Post by nytreeman »

AlleyCat wrote:Don, have you tried NAPA? They have always amazed me with the stuff they have listings for that nobody else can find.

Yes I have one ordered for a '75 with a 166" wb from napa hopefully it will work,plus I found a dentside a '78 f-250 at the junkyard with brand new cables so I got all 3 and the brackets and mounts,hope they will fit my highboy
~ Don

So much rust ... so little time

my gallery- http://www.fordification.com/galleries/ ... ?cat=10447
User avatar
nytreeman
New Member
New Member
Posts: 66
Joined: Sat Feb 02, 2008 2:49 pm
Location: Central NY

re: A good place to buy E-brake cables??

Post by nytreeman »

I also was given this info on "another" site :shh:
1967 F350

Regardless of the wheelbase, the front E-Brake cable is the same.

The 1964/72 Ford truck parts catalog only lists ONE.

The same F350 cable is used 1967/72.

C7TZ-2853-L .. Front Brake Cable-87 5/16" long
-----------------------------------------------------------------------
1973/75 F250 Regular Cab 4WD "highboy"

2-D5TZ-2A635-C .. Rear Brake Cable ~ right/left are the same.

There are two different front E-brake cables listed.

Before or after serial number T40,001

Before: C7TZ-2853-L (The same cable your '67 F350 uses)

After: D4TZ-2853-J
---------------------------------------------------------------------
~ Don

So much rust ... so little time

my gallery- http://www.fordification.com/galleries/ ... ?cat=10447
Post Reply