POWER STEERING

tynall44 · Post by **tynall44** » Sat Dec 15, 2007 9:12 pm

i got a 67 that has power steering on it ,,,,,i want to put it on my 69 what all do i have to change thanks tom

fordman · Post by **fordman** » Sat Dec 15, 2007 9:42 pm

the steering box and the steering pump. the columns should be the same length.

Post by **FORDification** » Sun Dec 16, 2007 12:03 am

That depends on whether the PS box is a Bendix or a Saginaw. If it's Bendix, then as fordman stated you simply need to change the box and pump/lines. If the box is a Saginaw, you'll also need to change out the columns. If the PS box on the '67 is stock, it won't be a Saginaw, but it's very possible a previous owner did the upgrades.

shand · Post by **shand** » Sun Dec 16, 2007 2:10 pm

Im looking to making the move to power in my 68. Not sure what box I have though.

Post by **FORDification** » Sun Dec 16, 2007 5:13 pm

shand wrote:Im looking to making the move to power in my 68. Not sure what box I have though.

Read the following tutorial....it should answer most (if not all) of your questions:

http://www.fordification.com/powersteering.htm

The FORDification.com Forums

POWER STEERING

POWER STEERING

re: POWER STEERING

re: POWER STEERING

Re: re: POWER STEERING