valve stems
Moderator: FORDification
-
dotcentral
- Preferred User
- Posts: 484
- Joined: Thu Jul 22, 2004 9:05 pm
- Location: Ridgecrest, CA
valve stems
I'm running the original steel wheels. these take those sort of coke bottle shaped valve stems. I haven't found a place locally that carries this type of valve stem. Most places have no idea what I'm talking about. Anyone know a place that carries these?
Former owner of 70 LB SportCustom and a 71 SB SportCustom. Looking for a replacement bump!
-
DuckRyder
- Moderator
- Posts: 4927
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
re: valve stems
F100?
Should take a standard stem, there are basically 4 versions
Big, Small and Short and Long.
It should take "BIG" and Long will work best if you have full wheel covers., short might work better if not.
Should take a standard stem, there are basically 4 versions
Big, Small and Short and Long.
It should take "BIG" and Long will work best if you have full wheel covers., short might work better if not.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
-
dotcentral
- Preferred User
- Posts: 484
- Joined: Thu Jul 22, 2004 9:05 pm
- Location: Ridgecrest, CA
re: valve stems
F100, full wheel covers. The base of the valve stem is wider that what is found on most cars today. From the base it sort of necks down to take the standard size valve stem cap.
Former owner of 70 LB SportCustom and a 71 SB SportCustom. Looking for a replacement bump!