3/4 to 1/2 ton swap
Moderator: FORDification
-
Stumpfoot
- New Member
- Posts: 18
- Joined: Wed May 16, 2007 6:45 pm
- Location: Bend Oregon
re: 3/4 to 1/2 ton swap
Thats about what mine look like, maybe there not as bad as I thought. I do know for a fact my radius arms are bent.
-
72hiboy4x4
- Blue Oval Fanatic
- Posts: 978
- Joined: Sat Jan 01, 2005 8:53 pm
- Location: As far away as I can be from Wa state, without crossing the Mississippi
- Contact:
-
Stumpfoot
- New Member
- Posts: 18
- Joined: Wed May 16, 2007 6:45 pm
- Location: Bend Oregon
Are the radius arms straight? I think my axles are ok but I know for a fact the radius arms are not. I will be up in Portland the end of June, if they are straight and you still have them, How much? PM me if you want.72hiboy4x4 wrote:I've got a 70 or 72 F-100 I am getting ready to part out. should have all the parts you need. Complete front end.
where are you at in OR? I am 40 miles north of Portland.
-
72hiboy4x4
- Blue Oval Fanatic
- Posts: 978
- Joined: Sat Jan 01, 2005 8:53 pm
- Location: As far away as I can be from Wa state, without crossing the Mississippi
- Contact:
Oh man, after the I-beam discussion, I went ahead and scrapped that truck. So I don't have them anymore, Sorry!
In life many men take the path of righteousness, some take the path many others follow (G.M. owners, for example), some take a more arduous path, some a simpler path. I, sir, took the PSYCO-PATH!!
-
Stumpfoot
- New Member
- Posts: 18
- Joined: Wed May 16, 2007 6:45 pm
- Location: Bend Oregon
re: 3/4 to 1/2 ton swap
Too bad, I should'nt have waited so long to ask!