Body Emblem Tape

Moderator: FORDification

Post Reply
qman
New Member
New Member
Posts: 175
Joined: Tue Dec 28, 2004 3:46 pm
Location: Colorado

Body Emblem Tape

Post by qman »

I bought some 3M Body something adhesive tape. The tape itself is 1/4 inch wide, black, and the part you peel off is red. Anyone ever use this stuff? I ask because as I was unrolling it to use it I felt it with my finger and it didn't seem sticky at all. Then I read the instructions and in addition to cleaning the surface, there was one step that said to apply some type of bonding enhancer (or something like that) to the body and part before applying the tape. So I went back to the paint shop and they didn't have the stuff, never heard of it, and said that all the body guys who buy from them have never asked for it. They said go ahead and try it and if it doesn't hold they'd give me back my money. The problem with that is that if the emblem falls off I'll have to go buy another. So I'm wondering if anyone can tell me if the stuff actually works.
72 F100 2wd 360 C6 Custom w/factory PS.
User avatar
SmokeyBear
Preferred User
Preferred User
Posts: 367
Joined: Tue Sep 27, 2005 8:41 am
Location: Kentucky

re: Body Emblem Tape

Post by SmokeyBear »

It works and it works WELL. It may not feel sticky to your finger because of the natural oils on your skin but a good clean surface of paint and it's there for good so make sure it's where you want.
70 F-100 XLT
"Christine" Gone but not forgotten.
72 F-100 Ranger XLT
qman
New Member
New Member
Posts: 175
Joined: Tue Dec 28, 2004 3:46 pm
Location: Colorado

re: Body Emblem Tape

Post by qman »

OK, I'm gonna give it a rip then.
72 F100 2wd 360 C6 Custom w/factory PS.
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

re: Body Emblem Tape

Post by fordman »

windshield mirror prep. not the glue part but the cleaner. i think its alcohol based. or mek but i don't know what mek will do. but its buzzing in my head that it might clean the paint to get the surface oil free. but then again maybe it would ruin the paint i don't know. alcohol is safe though.
Tim P.
Blue Oval Fan
Blue Oval Fan
Posts: 666
Joined: Sun Sep 12, 2004 1:16 am
Location: West Michigan area
Contact:

re: Body Emblem Tape

Post by Tim P. »

DO NOT USED MEK on your paint it will take the paint off alochol works great just wait for it to evaporate first .
Ford Is The Mountain That The Rock fell Off Of.

72 F-250 Camper Special 390 Stroker 419 CID 420 HP Natural Asp 200 HP NOS C-6 Dana 60 4.10
96 F-150 XLT 4X4 5.8 Heavy Duty 4EOD
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

re: Body Emblem Tape

Post by fordman »

yea i wasn't so sure about the mek after painting thanks for helping me out with that one.
Tim P.
Blue Oval Fan
Blue Oval Fan
Posts: 666
Joined: Sun Sep 12, 2004 1:16 am
Location: West Michigan area
Contact:

re: Body Emblem Tape

Post by Tim P. »

Not a problem, MEK is a very strong chemical, (Methyl Ethyl Keytone) it is sometimes used to thin urthanes type paints in small amounts sometimes epoxys too. Works extremely well for removing adhesives off emblems etc.oh BTY its also used to clean out your paint guns.
Ford Is The Mountain That The Rock fell Off Of.

72 F-250 Camper Special 390 Stroker 419 CID 420 HP Natural Asp 200 HP NOS C-6 Dana 60 4.10
96 F-150 XLT 4X4 5.8 Heavy Duty 4EOD
Post Reply