Looking for SBF motor mounts (engine stands that actually bolt to the frame).
Anyone have a set?
Thank you!
302/351w motor mounts
Moderator: FORDification
-
1971ford
- 100% FORDified!
- Posts: 5565
- Joined: Wed Jul 04, 2007 1:05 pm
- Location: Placerville CA
302/351w motor mounts
-Ryan
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 302/351w motor mounts
Ryan,
Nice to see you here still running our bumps after all these years!
I still remember you starting out under a cheap canopy working on your first truck?
Have you ruled out local bone yards that might have a set in a dent, (73'-79' truck?
https://fordification.com/tech/engine-perches.htm
Nice to see you here still running our bumps after all these years!
I still remember you starting out under a cheap canopy working on your first truck?
Have you ruled out local bone yards that might have a set in a dent, (73'-79' truck?
https://fordification.com/tech/engine-perches.htm
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4