Delphi early bronco power steering box

briansbronco · Post by **briansbronco** » Wed Dec 20, 2017 1:32 pm

Has anyone seen these? Direct swap for early bronco steering box. Which means it should be a bolt in for our bump sides. There is a guy on eBay selling them for 279 plus shipping. Fittings are SAE and comes with Pittman arm.

briansbronco · Post by **briansbronco** » Fri Dec 22, 2017 2:05 pm

I sent a few emails regarding this box and it seems to be a bolt in, with the exception of needing one extra hole drilled in the frame. I will be ordering one and I'll let you know how it works out. With the SAE fittings on the box you can essentially fit any power steering pump to it. Just have the hydraulic hoses made up locally.

1972hiboy · Post by **1972hiboy** » Fri Dec 22, 2017 3:28 pm

Could put a whole new light on the ever so great question about power steering for highboys.

briansbronco · Post by **briansbronco** » Fri Dec 22, 2017 4:53 pm

Now we just need an easy fix for front disc brakes!!!!

1972hiboy · Post by **1972hiboy** » Fri Dec 22, 2017 4:55 pm

sure and we can throw in world hunger while were at it........

71PA_Highboy · Post by **71PA_Highboy** » Sat Dec 23, 2017 10:20 am

Can you share a link?

I have never tried to put an EB Box in a Bump, but I don't think they will fit.

When you put one of the bump boxes in the EB, the longer sector shaft requires additional support.

In the bumps I think you will find the EB sector shaft will be too short to reach below the frame or if it fits below the frame it will be too short to mate to the column....

I may be wrong, this is just visualizations in my head... I also have 2 EBs currently, but no 2wd bumps, so I only really can see 1/2 the equation...

Still, please send a link... I wanna see this.

briansbronco · Post by **briansbronco** » Sat Dec 23, 2017 12:38 pm

I will get a link on here for you. I was intending to use it on a 4x4 bump, not a 2wd.

briansbronco · Post by **briansbronco** » Sat Dec 23, 2017 3:30 pm

Here is the one I am talking about. The guy on eBay rebuilds them I am guessing.

https://www.ebay.com/i/322941254385?chn ... 9736276756

The FORDification.com Forums

Delphi early bronco power steering box

Delphi early bronco power steering box

Re: Delphi early bronco power steering box

Re: Delphi early bronco power steering box

Re: Delphi early bronco power steering box

Re: Delphi early bronco power steering box

Re: Delphi early bronco power steering box

Re: Delphi early bronco power steering box

Re: Delphi early bronco power steering box