Overdrive kickdown bracket

Moderator: FORDification

Post Reply
bmerkley58
New Member
New Member
Posts: 64
Joined: Sun Mar 06, 2005 7:23 pm
Location: Indiana, Jasper

Overdrive kickdown bracket

Post by bmerkley58 »

I am looking for an overdrive kickdown bracket that bolts toward the top of the gas pedal assembly. This is a 90 degree angle piece of metal that bolts to the lower hole just below where the carburetor linkage attaches.

Thanks, Bob
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: Overdrive kickdown bracket

Post by basketcase0302 »

Image
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
bmerkley58
New Member
New Member
Posts: 64
Joined: Sun Mar 06, 2005 7:23 pm
Location: Indiana, Jasper

Re: Overdrive kickdown bracket

Post by bmerkley58 »

The part I need is not listed in that view.

Bob
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: Overdrive kickdown bracket

Post by sargentrs »

Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
bmerkley58
New Member
New Member
Posts: 64
Joined: Sun Mar 06, 2005 7:23 pm
Location: Indiana, Jasper

Re: Overdrive kickdown bracket

Post by bmerkley58 »

It is not listed there either, but it goes in the second hole from the top on assy, number 9725, This bracket pushes on the overdrive kickdown switch that mounts on the firewall.

Bob
Post Reply