Hey
My Name is Mark and as you can tell i was an army guy. last year i perchased a 1967 ford f500 truck from GSA. i perchased the truck for the 600 gallon tank on the back of it and at that time had no interest in the truck. when we rolled the truck off the trailer i put it in gear and let out the clutch and it started. So now i cant let a perfectly good truck go to the scrap yard. It has 44333 miles. started life as an airforce fuel truck then was a water truck for a small fire department in S.E. Oklahoma. It was parked in 2002 due to brake problems and placed in a GSA sale in 2010. it has no dents, only surface rust , the 240 I-6 with a np 435 trans with a pto, the rockwell d100 axle with 6.80 to 1 gears. the original speedo and gauge cluster they all work. i need the proper number for the brake booster. correct me if i am wrong but when the brakes are applied the engine pulls down so i disconnected the vac hose from the booster and then reapplied the breaks and no problem with the engine pulling down and about cutting out. so i need a new break booster and am having difficulty finding what i am sure is the proper replacement part number. This truck will soon be getting a 10 foot bed as well as paint and the frame will get a coat of chassis saver. any help would be great and thanks in advance. i know this truck is a bit bigger than the f350 but this is the best place i could find on the net to fit the current difficulty i am having. so once again thanks for your help. also if anyone knows where is could find a spicer brownie box near OKC OK please let me know 50 mph is a bit slow but the low gearing is great for pulling.
thanks again
Mark
HI and looking for the proper part number for.....
Moderator: FORDification
-
army_nurse
- New Member
- Posts: 1
- Joined: Thu Oct 13, 2011 9:47 pm
-
forrestbump
- 100% FORDified!
- Posts: 2140
- Joined: Tue Aug 10, 2010 12:23 am
- Location: California, Phelan
Re: HI and looking for the proper part number for.....
Mark, 
from SoCal. Sorry, I'm no help to you on your parts quest, but some other member here just may know what your looking for and where to get it.
from SoCal. Sorry, I'm no help to you on your parts quest, but some other member here just may know what your looking for and where to get it.1970, 2WD, F-250, C/S, Dual Tanks, 390 FE (of course), C6, Power Steering, Power Disc Brakes, Dana 60 3.73, Sky View Blue, Ranger XLT
1970, 2WD, F-250, C/S, A/C, Dual Tanks, 390 FE (again, of course), C6, Power Steering, Power Disc Brakes, Dana 60 3.73, Wimbledon White & Sky View Blue, Ranger (almost twin brothers!)
"One of the greatest discoveries a man makes, one of his great surprises, is to find he can do what he was afraid he couldn't do" - Henry Ford
Larry
1970, 2WD, F-250, C/S, A/C, Dual Tanks, 390 FE (again, of course), C6, Power Steering, Power Disc Brakes, Dana 60 3.73, Wimbledon White & Sky View Blue, Ranger (almost twin brothers!)
"One of the greatest discoveries a man makes, one of his great surprises, is to find he can do what he was afraid he couldn't do" - Henry Ford
Larry
-
nadams
- Preferred User
- Posts: 467
- Joined: Mon Nov 26, 2007 1:16 am
- Location: Washington, Poulsbo
Re: HI and looking for the proper part number for.....
Welcome from Washington State.
Hi, I'm Nathan and I approved this message.
1968 F250 LWB 360 (now 390) 4 sp High boy mine
1999 Expedition Eddie Bauer Edition 5.4 liter girlfriend and daughters
1968 F250 LWB 360 (now 390) 4 sp High boy mine
1999 Expedition Eddie Bauer Edition 5.4 liter girlfriend and daughters
-
STROKER69
- Preferred User
- Posts: 323
- Joined: Tue Mar 08, 2011 9:38 pm
- Location: Oakfield,Ga.
Re: HI and looking for the proper part number for.....
Welcome from s.w. georgia 
-
Mancar1
- 100% FORDified!
- Posts: 5390
- Joined: Thu Jun 10, 2010 8:13 am
- Location: USS Gramps Garage (DD-727) Tehama County, Northern Ca.
Re: HI and looking for the proper part number for.....
Welcome aboard from Northern Ca. Thanks 4 your service.
May your sails stay full, and your knots not slip. Unless a slip knot.
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
-
MrMajestyk
- Blue Oval Fan
- Posts: 508
- Joined: Sun Apr 17, 2011 11:55 pm
- Location: Phoenix, Arizona.
Re: HI and looking for the proper part number for.....
Mark and THANK YOU for YOUR Service 
-
fireguywtc
- 100% FORDified!
- Posts: 3682
- Joined: Thu Sep 11, 2008 7:37 pm
- Location: North Alabama
Re: HI and looking for the proper part number for.....
from Texas! Bill
1967 F-250 LWB 2WD 352 V8, 4spd manual, true duals, 122k original miles (currently being restored)
1970 F-250 4x4 highboy ranger 390 V8, 4spd
2012 F-350 PSD FX4 LWB CC lariat, white
http://www.fordification.com/galleries/ ... hp?uid=602
"If you want to judge a person's true character, give them power."
1967 F-250 LWB 2WD 352 V8, 4spd manual, true duals, 122k original miles (currently being restored)
1970 F-250 4x4 highboy ranger 390 V8, 4spd
2012 F-350 PSD FX4 LWB CC lariat, white
http://www.fordification.com/galleries/ ... hp?uid=602
"If you want to judge a person's true character, give them power."
-
Swegner99
- Preferred User
- Posts: 308
- Joined: Wed Aug 10, 2011 10:11 am
- Location: Bullhead City, Arizona
Re: HI and looking for the proper part number for.....
Welcome, you got any pictures of that beast?1972 F250 Custom LWB
1999 F150 Ext Cab
2001 E350 15 Passenger Van
1999 F150 Ext Cab
2001 E350 15 Passenger Van