Hello from Idaho
Moderator: FORDification
- tobsters70
- New Member
- Posts: 10
- Joined: Sat Mar 15, 2008 8:19 pm
- Location: Nampa, Idaho
- Contact:
Hello from Idaho
Hello all just started to post here on fordification!!! I hope to make some good friends here. I have a 1970 bump side in the middle of restoring. Please check out my car domain site for more info. Well see ya guys on the forums!!
Sorry guys here are some pics of my 70 taken back in 2004.
Here are some recent pictures and current status of my 70. The pics below are the removal of the old 240.
Sorry guys here are some pics of my 70 taken back in 2004.
Here are some recent pictures and current status of my 70. The pics below are the removal of the old 240.
Last edited by tobsters70 on Thu Apr 03, 2008 5:41 pm, edited 1 time in total.
-
- New Member
- Posts: 79
- Joined: Tue Feb 26, 2008 8:43 pm
- Location: Oklahoma, Oklahoma City
re: Hello from Idaho
A big welcome to ya from oklahoma.
1972 F100 Ranger
1971 F100 Custom
1999 ford contour(what a great $400 car)
1982 Ford Minibus
1971 F100 Custom
1999 ford contour(what a great $400 car)
1982 Ford Minibus
- TheEskimo
- Blue Oval Fanatic
- Posts: 932
- Joined: Thu Feb 02, 2006 10:11 pm
- Location: California, Clearlake
- Contact:
-
- New Member
- Posts: 22
- Joined: Mon Feb 25, 2008 10:39 pm
- Location: Ohio, Columbus
re: Hello from Idaho
Hello and Welcome from Ohio! I like your truck. Good luck with the restoration!
1969 F250 Highboy - 360 FE - NP 435
SOLD
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
re: Hello from Idaho
tobsters70,
from Florida.
And hey...if nobody told ya
Jeff
from Florida.
And hey...if nobody told ya
Jeff
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
- 1970FordTK
- 100% FORDified!
- Posts: 2831
- Joined: Tue Mar 13, 2007 9:37 pm
- Location: North Carolina
re: Hello from Idaho
Welcome from North Carolina.
- 69F110
- Blue Oval Guru
- Posts: 1024
- Joined: Mon Jul 19, 2004 1:07 pm
- Location: Bunkie, Louisiana
- Contact:
- ford4x4fun
- Blue Oval Guru
- Posts: 1468
- Joined: Sun Dec 02, 2007 8:38 pm
- Location: Cadiz, KY
- Contact:
Re: re: Hello from Idaho
basketcase0302 wrote:tobsters70,
from Florida.
And hey...if nobody told ya
Jeff
And Hello from TN VIA Afghan
CNR Radio Instructor
US ARMY Retired
1971 Ford F100 4x4 (390)
2015 Ford F250 Crew Cab 6.7l
US ARMY Retired
1971 Ford F100 4x4 (390)
2015 Ford F250 Crew Cab 6.7l
- tobsters70
- New Member
- Posts: 10
- Joined: Sat Mar 15, 2008 8:19 pm
- Location: Nampa, Idaho
- Contact:
re: Hello from Idaho
Thanks all for the welcome!!!
- F100builder
- Blue Oval Guru
- Posts: 1304
- Joined: Thu Jan 10, 2008 6:55 pm
- Location: Idaho, Nampa
re: Hello from Idaho
Welcome from only two miles away!!!
Patrick
'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56
'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56
- RedneckTexan
- Blue Oval Guru
- Posts: 1102
- Joined: Tue Apr 03, 2007 6:58 pm
- Location: The backwoods of TEJAS!
- zorcas
- New Member
- Posts: 26
- Joined: Fri Mar 14, 2008 12:44 am
- Location: Orcas Island, Washington State
re: Hello from Idaho
Welcome from Washington State!
Marty
Marty
- JWW
- Blue Oval Fanatic
- Posts: 793
- Joined: Wed Apr 11, 2007 7:57 pm
- Location: Tennessee
Welcome from Tennessee!
JWW
1967 F100 Ranger, Auto, 240ci
2004 F150 Crew Cab
My project: http://www.fordification.com/forum/view ... &sk=t&sd=a
1967 F100 Ranger, Auto, 240ci
2004 F150 Crew Cab
My project: http://www.fordification.com/forum/view ... &sk=t&sd=a
- tobsters70
- New Member
- Posts: 10
- Joined: Sat Mar 15, 2008 8:19 pm
- Location: Nampa, Idaho
- Contact:
re: Hello from Idaho
Just updated with pics on the original post.
-
- Preferred User
- Posts: 275
- Joined: Mon Apr 23, 2007 8:21 am
- Location: New Jersey
re: Hello from Idaho
welcome from NJ.. sharpe looking truck.. keep the pics of the progress coming!
Tony
bumpless but still diggin them....
bumpless but still diggin them....