bumps with lowered altitude!! (lots of great custom bumps!!)

[FRANKdaTANK]

wwjd63, that's a realy nice truck.

+1

[03rangerxlt]

bump to get it to the top... this would be a great sticky.

[FordTruck]

Here's a lowered slick I found





More pictures
http://s3.photobucket.com/albums/y63/azgfk/62%20Ford/

[marz68]

Hey fordtruck do you know what was done to the front end to lower it?
My friend is almost done with one of his customers unibody that is dropped flat on the ground with a mustang 2 setup. I'll snap a few pictures when I get a chance and post them on here.

[FordTruck]

No I don't know what they did to lower it. I found it while I was lookin around on craigslist but here's some pictures from his photobucket

[mike68merc]

Wow those front springs are pretty Flat. Bet that thing Eats Bump Stops for breakfast!

Looks Cool though.

Wo! just noticed the last pic...That's a pretty radical C-notch! Isn't that a bit Too Deep?!...Even if he does Box the rear frame rails?
I thought I heard you shouldn't cut more than 1/2 the thickness of the frame? (even if you Box it).

.....One of you chassis guys set me straight on this

[marz68]

yeah it looks like he needs smaller bump stops, looks cool tho.

[ezernut9mm]

Hey fordtruck do you know what was done to the front end to lower it?
My friend is almost done with one of his customers unibody that is dropped flat on the ground with a mustang 2 setup. I'll snap a few pictures when I get a chance and post them on here.

he is a member of slick 60s and has it for sale over there along with a sweet 56? buick. i think he had the i beam dropped by a reputable shop. you can see it in the first and second pic. notice how the i beam is lower than the rim? hat eot get a flat tire on that thing.

[ezernut9mm]

link to ad:
http://phoenix.craigslist.org/evl/cto/1154977516.html

here is another one from over there with a sectioned chop top.

http://www.fordtruk.com/forums/viewtopi ... 5&start=80

[marz68]

Check this out! Just look at how much the rear wheels tuck, you can tell this one is going to be low!
Cool shifter knob too..

[FordTruck]

Here's a few I found on CL

http://chicago.craigslist.org/nwc/cto/1201908327.html





http://stlouis.craigslist.org/cto/1199495243.html

[mike68merc]

Can't believe nobody's posted it yet!, but our Buddy with the Silver '67....



... is on the cover of August's CLASSIC TRUCKS magazine: http://www.classictrucks.com/features/0 ... index.html
It's absolute automotive ART!


...& As if I weren't jealous enough already, he has a second "beater" made from"left over", EXTRA parts for a daily driver!

http://www.classictrucks.com/features/0 ... index.html


...Looks alot like T.D.'s Red '68 Don't it?

[wt4speed#2]

Can't believe nobody's posted it yet!, but our Buddy with the Silver '67....



... is on the cover of August's CLASSIC TRUCKS magazine: http://www.classictrucks.com/features/0 ... index.html
It's absolute automotive ART!


...& As if I weren't jealous enough already, he has a second "beater" made from"left over", EXTRA parts for a daily driver!

http://www.classictrucks.com/features/0 ... index.html


...Looks alot like T.D.'s Red '68 Don't it?

I just didn't get to posting it in this thread.
http://www.fordification.com/forum/view ... 80#p385980

[t-waits]

i been waiting for this post, pearls not in the weeds like some, but i like it

Noticed your 68 Georgia Plate on the rear...Where do you live?

TW

[lee_ford]

Here is a new one. I did only a 1 1/4 inch drop on the front, and most people won't even notice. It will still look stock to them but the handling is GREATLY improved and I think the look also.


Here is a link to the post on how I did it.