67' 250 hi boy CS: caution lot o pics

[Manny]

Manny, pulling a manifold back to change a gasket without dropping the pipe isn't cheating, it's wrenching. Looking good

Yeah thats using the noggin i took one look at the collector studs, and went nope ain't gonna bust them off!

[layedout72]

double posted, sorry about that.

[layedout72]

you say you got 2 bum regulators, how did you go about testing them to see if they were good or bad? i am in the same situation now and need to check mine.

[cghstrojan08]

Looking good dude.

[Finleyphoto]

Next time instead of the Red RTV, use the anti-seize compound.

You can even use it as a gasket sealer on the exhaust system AND on your new lug nuts!


Dennis

[19674x4]

so how has the low rise intake worked out. helped with power, mileage? i cant remember if you had a 2bbl or a 4bbl.

[67nukeford]

Dan, any updates on the truck???

[Manny]

Dan, any updates on the truck???

Sorry Pat i haven't really done anything here but i will bite now and catch up some.

Well i found the lower column bearing had unseated so i chose to rebuild it.
Here is all the stuff snatched out.


Something is missing


This old thing had not been apart in a long time.


I cleaned it up and got all my parts from Dennis Carpenter.


I was very happy with my DC stuff. Fit was good on it and i couldn't believe having a cancelling that worked. The wheel got reused but i have got a nice one i am going to reuse now.


Gonna have to dig up some more pictures for you guys.