1970 F250 4X4 Rebuild / Updating

[hfdco4]

Been slow progress this past week with traveling to see family. Did get out to the garage for a few today. I am still working on the front axle but am missing a spring between the hub and the bearing. Here is a picture of what is on the Passenger Side.

Internal Spring.jpg

[Manny]

Been slow progress this past week with traveling to see family. Did get out to the garage for a few today. I am still working on the front axle but am missing a spring between the hub and the bearing. Here is a picture of what is on the Passenger Side.

Internal Spring.jpg

I have not forgotten you but just getting back in the groove here. I've got some springs here if you need one and a cup. Just want it added to your list. Pm me we will get a box of junk headed your way.. I promise pictures within 36 hours

[hfdco4]

Awesome sir!

[Manny]

Here you go got pretty much the whole axle don't want to part it to death but can get you squared away. I also have those hub springs your hunting. Sorry for the crappy pictures the phone for one versus the camera second that axle is buried.








let me know.

[hfdco4]

Man I wish you were closer. I would love the spring for sure. I wouldn't mind the caliper brackets too, but only if you are taking it apart.

[Manny]

Man I wish you were closer. I would love the spring for sure. I wouldn't mind the caliper brackets too, but only if you are taking it apart.

Pm me your address can ship some junk..

[Manny]

Just hit up Ebay myself to hunt there is tons of reman calipers with pads and brackets from 60$-$120 I saw but redone ready to go may be something to consider. We will get it sorted! Pm your address I will ship you a spring

[Lone Ranger]

Holy cow Manny you have an axle farm there!


Hope you get that axle all squared away. It stinks when you get stuck on parts. Still rootin for ya!

[hfdco4]

Oh I am good. This isn't really holding me up yet. I just want to get the front axle mounted back onto the frame so it can be moved out of the garage. Need to get to work on the cab now.

[Manny]

Oh I am good. This isn't really holding me up yet. I just want to get the front axle mounted back onto the frame so it can be moved out of the garage. Need to get to work on the cab now.

I checked the 60 brackets i got look like it may be the winner gonna bolt it up check and take photos. How soon you need them? obviously sooner the better.

[hfdco4]

No rush sir. I am hitting the front axle hard just to get it mounted and moveable. The frame is going outside for the winter. Today we were out in the garage making a traditional Italian Christmas Pizzelle cookie. We have to use the grill so she can heated up the cookie press. Since we were both out there I got the two top nuts tightened on the ball joints and installed the cotter pins. Now I need to clean and paint the tie-rod. I also have to install the new Axle U-Joint on the short side. Only a little progress but still progress. It was fun working out in the garage while it was snowing.

[Lone Ranger]

I hear ya! I love having a warm fire in the garage when it's nasty snowy outside. I'm excited for your frame to be a roller so I can see your cab work - you do good work.

[hfdco4]

Thank you Ranger! It does feel good to get complemented on something I truly love doing.

[Lone Ranger]

Thank you Ranger! It does feel good to get complemented on something I truly love doing.

I just have seen your attention to detail and know there's not a square inch you have overlooked. The cab will be fun to watch. I kinda wish I had pulled my cab. Maybe next time I redo it.

[hfdco4]

I just have seen your attention to detail and know there's not a square inch you have overlooked. The cab will be fun to watch. I kinda wish I had pulled my cab. Maybe next time I redo it.[/quote]

Oh I am sure I have overlooked things, but they will show up and get done. I want to get the floor work done on the cab so I can coat the underneath of the cab. That way I can work on the dent in the cab.