1970 F250 4X4 Rebuild / Updating

Post progress reports on your project truck(s)

Moderator: FORDification

Post Reply
Lone Ranger
Blue Oval Fan
Blue Oval Fan
Posts: 663
Joined: Tue Jun 21, 2016 2:27 pm
Location: Northern Michigan

Re: 1970 F250 4X4 Rebuild / Updating

Post by Lone Ranger »

Sweet! That's gonna be a bad mamba jamba!
1972 f100 4x4 4 inch lift with dump box kit-sold
1969 f250 4x4 highboy in progress.
http://www.fordification.com/forum/view ... 22&t=85251
Kyle
User avatar
Manny
Blue Oval Guru
Blue Oval Guru
Posts: 1190
Joined: Wed Oct 04, 2006 7:15 pm
Location: Georgia, Lake City
Contact:

Re: 1970 F250 4X4 Rebuild / Updating

Post by Manny »

hfdco4 wrote:I have 37-12-16.5 military tires I am going to be running.
There is a Mercury on fordification facebook. It is 37-16.5 with 3 inches looks very good.
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1312
Joined: Mon Apr 01, 2013 1:45 pm

Re: 1970 F250 4X4 Rebuild / Updating

Post by hfdco4 »

I have to find it, but I have a pic of my truck on 40's. It was a blast in the snow. We would air down the tires and crawl across the deep snow like nothing.
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
rms
New Member
New Member
Posts: 50
Joined: Sun Aug 23, 2015 1:50 pm
Location: North Atlanta

Re: 1970 F250 4X4 Rebuild / Updating

Post by rms »

This is a great build, nice work!
-Ryan
1969 F100
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1312
Joined: Mon Apr 01, 2013 1:45 pm

Re: 1970 F250 4X4 Rebuild / Updating

Post by hfdco4 »

Thanks. Got some more work done on the new front axle. Got the passenger side axle out and the Knuckle off. Also managed to get the lower ball joint out. The good thing is the front axle seems to be in really good condition.
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1312
Joined: Mon Apr 01, 2013 1:45 pm

Re: 1970 F250 4X4 Rebuild / Updating

Post by hfdco4 »

Scored a set of Mile Marker 104 hubs from Amazon for $57. I am going to pick up u-joints for the front axles as well.
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1312
Joined: Mon Apr 01, 2013 1:45 pm

Re: 1970 F250 4X4 Rebuild / Updating

Post by hfdco4 »

Hubs came today, man they are nice! Got one u-joint installed in the axle. Now I have to pick up the Ball Joint tool from Autozone so I don't have to buy one! I want to get the Ball Joints done so I can get the axle panted.
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
Lone Ranger
Blue Oval Fan
Blue Oval Fan
Posts: 663
Joined: Tue Jun 21, 2016 2:27 pm
Location: Northern Michigan

Re: 1970 F250 4X4 Rebuild / Updating

Post by Lone Ranger »

Great score on the locking hubs! Can't wait to see the "new" axle all painted up!
1972 f100 4x4 4 inch lift with dump box kit-sold
1969 f250 4x4 highboy in progress.
http://www.fordification.com/forum/view ... 22&t=85251
Kyle
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1312
Joined: Mon Apr 01, 2013 1:45 pm

Re: 1970 F250 4X4 Rebuild / Updating

Post by hfdco4 »

I did get the four new Ball Joints installed into the knuckles. It was a breeze with the proper tool. I got the loaner from Autozone and it was great. While pulling the Drivers side hub I found a few surprises. The locking hub was broken, the wheel bearing is rusty and I think the u-joint is bad. Not a big deal as I have the new hubs and replacing the bearings were already a possibility. Now for the pictures.
20171029_143811a.jpg
20171029_143823a.jpg
20171029_143834a.jpg
You do not have the required permissions to view the files attached to this post.
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1312
Joined: Mon Apr 01, 2013 1:45 pm

Re: 1970 F250 4X4 Rebuild / Updating

Post by hfdco4 »

And here is what the axle looks like today.
20171029_151056a.jpg
You do not have the required permissions to view the files attached to this post.
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1312
Joined: Mon Apr 01, 2013 1:45 pm

Re: 1970 F250 4X4 Rebuild / Updating

Post by hfdco4 »

Went a head and ordered the Wheel bearings and seals for the front.
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
User avatar
Manny
Blue Oval Guru
Blue Oval Guru
Posts: 1190
Joined: Wed Oct 04, 2006 7:15 pm
Location: Georgia, Lake City
Contact:

Re: 1970 F250 4X4 Rebuild / Updating

Post by Manny »

Think you will be real happy with the hp d44. looks good for certain. Can't wait to see your height when its done. KEEP GOING!
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1312
Joined: Mon Apr 01, 2013 1:45 pm

Re: 1970 F250 4X4 Rebuild / Updating

Post by hfdco4 »

Me too. I am hoping that there is a slight rake back to front.
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
User avatar
Manny
Blue Oval Guru
Blue Oval Guru
Posts: 1190
Joined: Wed Oct 04, 2006 7:15 pm
Location: Georgia, Lake City
Contact:

Re: 1970 F250 4X4 Rebuild / Updating

Post by Manny »

hfdco4 wrote:Me too. I am hoping that there is a slight rake back to front.
Looking for perfect level on mine. I may add air bags on the rear like my dually for if it gets loaded up. Just like a nice tall simple stance..... If such a thing exists!!!! :lol:
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1312
Joined: Mon Apr 01, 2013 1:45 pm

Re: 1970 F250 4X4 Rebuild / Updating

Post by hfdco4 »

Well as you know, these things have springs that do not bend very well at all...LOL.
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
Post Reply