Also if you are that concerned, use a limiting strap! Just like Ross has said or use a turn buckle will work too. Good luck
Which vendor has the best FE motor mounts?
Moderators: Ranchero50, DuckRyder
-
FORD428CJ
- New Member
- Posts: 158
- Joined: Mon Jun 20, 2005 11:13 am
- Location: Oregon, Klamath Falls
Re: Which vendor has the best FE motor mounts?
I have done it with a car engine mount! I cant say that I have done it with my truck. No N20 on it but I drove the hell out of it with good luck! I was just as hard on it, if not harder then most LOL. I think you will be just fine, with no worries
Also if you are that concerned, use a limiting strap! Just like Ross has said or use a turn buckle will work too. Good luck
Also if you are that concerned, use a limiting strap! Just like Ross has said or use a turn buckle will work too. Good luck
Wes Adams FORD428CJ
Built Ford Tuff With Good Ford Stuff
79 F-250 X-Cab 4x4 6.9 Turbo Diesel
64 Falcon X-Ram 428
55 FORD Truck 4-link Rides on air with X-Ram 428
67 Stang 351 C/J
2000 Yamaha V-MAX VMOA#4277
Built Ford Tuff With Good Ford Stuff
79 F-250 X-Cab 4x4 6.9 Turbo Diesel
64 Falcon X-Ram 428
55 FORD Truck 4-link Rides on air with X-Ram 428
67 Stang 351 C/J
2000 Yamaha V-MAX VMOA#4277
-
papabug71
- 100% FORDified!
- Posts: 2002
- Joined: Mon Oct 13, 2008 11:31 pm
- Location: McAlester, Oklahoma
Re: Which vendor has the best FE motor mounts?
I cant tell you how many of these trucks I have seen with a good ol' redneck torque strap 
. Also known as a chain bolted to the frame. LOL!
. Also known as a chain bolted to the frame. LOL!
Matt
1971 F-100 Sport Custom - My grandpaws truck
Been in the family since 10/3/'71 (Brand spankin' new)
Mine since 5/7/'94
302 / 3 speed / 3:25's
--Currently undergoing full frame off resto/mod--