Front disc change over

[convincor]

You wouldn't be cutting up a bump, you'd be sacrificing a dent.
Find something like this, you'd have everything you need.
http://chico.craigslist.org/car/691250597.html

[JWW]

get the yard to cut the front clip off and bring it home for Ryan to do all the wrenching.

That's what I did. I had a salvage yard cut the frame off and brought all that home with me. It allowed me to work on it when I had time.

[BiggDogg]

get the yard to cut the front clip off and bring it home for Ryan to do all the wrenching.

That's what I did. I had a salvage yard cut the frame off and brought all that home with me. It allowed me to work on it when I had time.

how much did they charge ya for that?

[1971ford]

convincor, your right, i was thinking bumpside at the time.

[1971ford]

You wouldn't be cutting up a bump, you'd be sacrificing a dent.
Find something like this, you'd have everything you need.
http://chico.craigslist.org/car/691250597.html

but if i got that, i would end up making it into a desert truck
looks like good desert truck potential

[JWW]

get the yard to cut the front clip off and bring it home for Ryan to do all the wrenching.

That's what I did. I had a salvage yard cut the frame off and brought all that home with me. It allowed me to work on it when I had time.

how much did they charge ya for that?

Cost me $100. The cool thing was a guy there getting some parts for his vehicle hauled it home for me. Here's what I brought home:




Like Convincor said, I sacrificed a Dent.

[1971ford]

yeah thats what i want to do.

so it cost you $100 just for them to torch it off? thats a bit much!

[BiggDogg]

Ryan I think it cost him $100 for the torch job and the parts, not just the torch job... atleast that's what I'm hoping...

[OLE69F100]

I brought home the same thing as above for $250 but It did have new springs.

[JWW]

Ryan I think it cost him $100 for the torch job and the parts, not just the torch job... atleast that's what I'm hoping...

Yeah, you are right. The $100 included the parts as well. They used a reciprocating saw to cut the frame for me. It worked great for me because I could work on getting it off the frame whenever I had the time.

[1971ford]

well im doing that then

thanks for the help guys

[H-DFord]

Got one in my front yard but to far away to help Ryan. It's going to scrap yard soon.

[sport71]

Mr. Ryans' Dad, you might want to replace the rubber, since you are doing the swap.

[1971ford]

the truck is pretty much down to the frame and everything is going to be gone over, all bushings replaced and everything sanded and por-15ed so it will all be like new

[1971ford]

SHEESH still havent found a dent with the front clip removed and went to a Ford junkyard and they wanted $350 jeebers!