Toughest coating/lining/paint?

[spartman]

I read an article about rust bullit being better.

I guess rust bullet, por-15,naval jelly, and a couple of others went through some lab tests and the rust bullit stuff came out the winner.

Seems legit, it is of course on rust bullits site.

Makes you wonder though.

[Tim P.]

Eastwoods Rust encapsulator is excellent stuff to and you can prime or paint over only 20% gloss when sprayed on. As far as powder coating the shop needs to move the ground closer to the area to coat this helps draw the powder in to cracks try to hurry the job because they are more concerned about wasting powder then doing a thoural job.
Sorry Keith I worked in a shop so I saw what they would do on some jobs as to the powder biz and on a good day they would get into the cracks just fine.

[FORDification]

...Don't use it on springs, it is not made to flex that much, a good coat of paint will work for them.

Hey Max...when I was at the shop yesterday, I made a short video specifically for you, to show you how flexible POR-15 really is.


Click here to see Video