Can anyone confirm the smallest Ford and GM 8 lug patterns to both be 8 on 6.5?
Does anyone know of the existance of Ford single rear wheel offset 19.5 wheels with 8 on 6.5?
Chris
8 hole lug patterns from the 60s
Moderator: FORDification
-
ChrisB
- New Member
- Posts: 73
- Joined: Thu Jul 28, 2005 6:57 pm
- Location: Southern California
-
72hiboy4x4
- Blue Oval Fanatic
- Posts: 978
- Joined: Sat Jan 01, 2005 8:53 pm
- Location: As far away as I can be from Wa state, without crossing the Mississippi
- Contact:
dont know what year and make they are, but UPS vans around here use a 19.5 8 lug wheel. I found this out looking for replacement wheel for one of my projects.
In life many men take the path of righteousness, some take the path many others follow (G.M. owners, for example), some take a more arduous path, some a simpler path. I, sir, took the PSYCO-PATH!!
-
ChrisB
- New Member
- Posts: 73
- Joined: Thu Jul 28, 2005 6:57 pm
- Location: Southern California
re: 8 hole lug patterns from the 60s
Does it look like an 8 on 6.5? My guess is it's bigger, but the UPS truck wheels have not been on my radar. You got a good source of used or even new wheels that might have something like this?
The set of 5 I saw on ebay from a '64 Gm panel' truck went for $30 some odd near Rochester, NY. It made me sick. I did anything I could to get the owner to ship or bring them with him as he is moving to AZ. I live in so Cal. I would have bid up to $150-$200 or so.
From what I've seen nobody will make new ones for less than $200-250 a PIECE, which is dissapointing when you can get a 15" for under $50 a piece new.
Anyone got a source for this wheel new or used which reasonably priced?
The set of 5 I saw on ebay from a '64 Gm panel' truck went for $30 some odd near Rochester, NY. It made me sick. I did anything I could to get the owner to ship or bring them with him as he is moving to AZ. I live in so Cal. I would have bid up to $150-$200 or so.
From what I've seen nobody will make new ones for less than $200-250 a PIECE, which is dissapointing when you can get a 15" for under $50 a piece new.
Anyone got a source for this wheel new or used which reasonably priced?