Kingpin install

[dotcentral]

Got the passenger side installed, 4 shims, .010 clearance.

also took a pic of how the seal goes into the upper spindle bore. There is sort of a groove in one side of this thing, so I installed that side up, thinking that it would catch the grease and help hold it in the upper part of the assembly.

The spindle is shown upside down in this picture. A little easier to install it like this.

[oldschoolrods]

some spring shops stock just the shims, might not be an exact fit but you can find some that are close, i lost the shims on my king pins i just installed, however at my work we had a bunch in stock and found some that worked perfect.