Glove Box Trim- Looking for clips

Inside the cab...appearance, repair, upgrades

Moderator: FORDification

Post Reply
User avatar
mrtleavitt
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 767
Joined: Fri Apr 20, 2007 8:26 pm
Location: Overton, NV

Glove Box Trim- Looking for clips

Post by mrtleavitt »

I've misplaced some clips that attach the chrome trim around the glovebox on my dad's '70 F100. You can see in the picture the chrome trim that goes around the glove box and a piece that continues under the ash tray. Does anyone know where I can find these small, spring clips?

Image
1969 F100 428 with T19, 3.00 9inch 31 spline w/ Detroit Trutrac, '74 frame swap successful!
http://s43.photobucket.com/albums/e356/mrtleavitt/
youngone
New Member
New Member
Posts: 100
Joined: Mon Jul 23, 2012 2:46 pm

Re: Glove Box Trim- Looking for clips

Post by youngone »

No idea but here is a bump for you.
1968f250429
New Member
New Member
Posts: 116
Joined: Wed Sep 08, 2010 10:40 pm
Location: Kirkland, Az

Re: Glove Box Trim- Looking for clips

Post by 1968f250429 »

let me see if I can get the oe part number for you from my parts book and then I would try green sales company. they are a obsolescence warehouse for ford parts.

I have found the part number it is C0AB-6404439-F. I have checked with green sales and they don't have any per their website. I would still give them a call though.
Last edited by 1968f250429 on Sun Jan 05, 2014 9:37 pm, edited 1 time in total.
User avatar
mrtleavitt
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 767
Joined: Fri Apr 20, 2007 8:26 pm
Location: Overton, NV

Re: Glove Box Trim- Looking for clips

Post by mrtleavitt »

I would appreciate it. I can't believe I lost those clips. I'm really kicking myself for it now.
1969 F100 428 with T19, 3.00 9inch 31 spline w/ Detroit Trutrac, '74 frame swap successful!
http://s43.photobucket.com/albums/e356/mrtleavitt/
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: Glove Box Trim- Looking for clips

Post by sargentrs »

In the meantime, a little double-sided tape will hold it in place.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
red403
New Member
New Member
Posts: 222
Joined: Mon Oct 05, 2009 1:51 am

Re: Glove Box Trim- Looking for clips

Post by red403 »

I know I have some somewhere but we are building a house and have a lot of stuff in storage. If you pm me when I find them I will let you know when I find them.
User avatar
Abrams
New Member
New Member
Posts: 181
Joined: Wed Nov 20, 2013 9:32 pm
Location: San Jose, CA

Re: Glove Box Trim- Looking for clips

Post by Abrams »

I actually picked up a handful of them at the local yard. You never know when someone might need one.
Let me know if you still need them.
Regards
A
User avatar
mrtleavitt
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 767
Joined: Fri Apr 20, 2007 8:26 pm
Location: Overton, NV

Re: Glove Box Trim- Looking for clips

Post by mrtleavitt »

Funny you posted today because I finally found some at a local pic a part today. I haven't seen a bump side there for over two years and today there were two! Thanks everyone for your help.
1969 F100 428 with T19, 3.00 9inch 31 spline w/ Detroit Trutrac, '74 frame swap successful!
http://s43.photobucket.com/albums/e356/mrtleavitt/
SBR_GUY
New Member
New Member
Posts: 40
Joined: Wed Apr 15, 2020 8:38 pm
Location: Georgia

Re: Glove Box Trim- Looking for clips

Post by SBR_GUY »

Abrams wrote: Mon Jan 27, 2014 9:14 pm I actually picked up a handful of them at the local yard. You never know when someone might need one.
Let me know if you still need them.
Regards
A
If you still have these i sure could use them.
1967 F100 Styleside Longbed W/352FE. Tremec TKX 5 Speed.
:D :D
Just loving life.
SBR_GUY
New Member
New Member
Posts: 40
Joined: Wed Apr 15, 2020 8:38 pm
Location: Georgia

Re: Glove Box Trim- Looking for clips

Post by SBR_GUY »

Abrams wrote: Mon Jan 27, 2014 9:14 pm I actually picked up a handful of them at the local yard. You never know when someone might need one.
Let me know if you still need them.
Regards
A
Do you still have these. I could use them.
1967 F100 Styleside Longbed W/352FE. Tremec TKX 5 Speed.
:D :D
Just loving life.
savage70
New Member
New Member
Posts: 4
Joined: Tue Aug 22, 2023 4:34 pm

Re: Glove Box Trim- Looking for clips

Post by savage70 »

If you locate any please let me know and i will do the same for you as I am currently looking for 5 of them myself
Post Reply