I had my 1968 F500 sitting for over a year becuause of bad wader pump but also i was busy drinkin or working. i'm back now. The question is what to do with my wheels and tires? It has old 7.50-20 Tube Type Load Range E Goodyear Tires on it. possibly widowmaker split rims but i don't know. One tire and tube doesn't hold air. The rest are holding 30 to 40 psi. I don't want to put moar. Not sure what they are supposed to hold. muffler split open last time i sheared the roll pin. Boom! it was a new muffler. No brakes but i bled the rear a little bit and it has some brakes now. i was lazy and sprayed a quart of boiled linseed oil mixed with one quart of mineral spirits. It is dark and shiny now but still sticky after a day. you are supposed to wipe on a thin coat i think. but i'm sure it isn't gonna hurt anything. You want pictures don't you? Fine.
my other projects are a 1992 Ford Festiva. It runs. poorly.
1983 F100 SWB 300 inline six and 3 speed manual. Does not run but I have a donor 300 inline from a 1977 ish F100.
1979 GMC C20 350 v8 4 speed granny transmission. Runs! but i removed stuff to try and replace wader pump. still taken apart and maybe a bad head gasket.
2003 F250 daily driver, six speed manual and two wheel drive, crew cab, long bed and 7.3 L Diesel baby! I feel like i missed something. nope. that is the fleet. Green, Grey, Brown, Blue and Red vehicles. F500, Festiva, F100, GMC C20 and F250 Powerstroke.
Holy Cow! I'm still around.
Moderator: FORDification
- dolinick
- Blue Oval Fanatic
- Posts: 895
- Joined: Sun Aug 05, 2007 8:45 pm
- Location: Texas, San Antonio
Holy Cow! I'm still around.
2003 7.3L F250
1968 F500 Utility Truck
1968 F500 Utility Truck
- dolinick
- Blue Oval Fanatic
- Posts: 895
- Joined: Sun Aug 05, 2007 8:45 pm
- Location: Texas, San Antonio
Re: Holy Cow! I'm still around.
2003 7.3L F250
1968 F500 Utility Truck
1968 F500 Utility Truck