Ashtray side bearings
Moderator: FORDification
-
jp2005
- Blue Oval Guru
- Posts: 1085
- Joined: Fri Jul 02, 2010 1:29 pm
- Location: Phoenix AZ
Ashtray side bearings
Does anyone have 4 ashtray side bearings? Thank you!
You do not have the required permissions to view the files attached to this post.
Thanks JP! Ms. Cordova is a factory 1969 Ford F100 Ranger with a 390, Front disc brakes, Cordova copper orange, behind the seat box
-
Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: Ashtray side bearings
I want to say they are 1/4" or 5/16". NAPA can get them if you don't find another set.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
-
Busboy
- Blue Oval Fanatic
- Posts: 943
- Joined: Sat Jan 24, 2015 9:51 am
- Location: Nampa Idaho
Re: Ashtray side bearings
They are 21/64's or 11/32nds. I've looked but haven't found a source yet.
1967 F-100 4x4 custom cab.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
-
jp2005
- Blue Oval Guru
- Posts: 1085
- Joined: Fri Jul 02, 2010 1:29 pm
- Location: Phoenix AZ
Re: Ashtray side bearings
Wow! Thanks guys!that's helpful I was calling and posting all day trying to find a place. I also called Ace hardware and they sell individual bearings which I didnt know. I'm going to stop there after work. 
Love this website! I'll keep you posted what I find.
Love this website! I'll keep you posted what I find.
Thanks JP! Ms. Cordova is a factory 1969 Ford F100 Ranger with a 390, Front disc brakes, Cordova copper orange, behind the seat box
-
jp2005
- Blue Oval Guru
- Posts: 1085
- Joined: Fri Jul 02, 2010 1:29 pm
- Location: Phoenix AZ
Re: Ashtray side bearings
Well guys Ace was no help wrong sizes. So what I did was type 11/32 bearings into ebay and purchased a pack of 50 for $6.95 now if I lose any I have backups! Hahahajp2005 wrote:Wow! Thanks guys!that's helpful I was calling and posting all day trying to find a place. I also called Ace hardware and they sell individual bearings which I didnt know. I'm going to stop there after work.
Love this website! I'll keep you posted what I find.
Thanks JP! Ms. Cordova is a factory 1969 Ford F100 Ranger with a 390, Front disc brakes, Cordova copper orange, behind the seat box
-
Busboy
- Blue Oval Fanatic
- Posts: 943
- Joined: Sat Jan 24, 2015 9:51 am
- Location: Nampa Idaho
Re: Ashtray side bearings
Yeah I tries Ace. They had every size but 11/32nds.
1967 F-100 4x4 custom cab.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Ashtray side bearings
McMaster Carr carries every size and material imaginable.
You do not have the required permissions to view the files attached to this post.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: Ashtray side bearings
Can we get a look at the bracket that holds the bearing in place? I have 68 and a 71, both are missing the bearings and the bracket.
-
jp2005
- Blue Oval Guru
- Posts: 1085
- Joined: Fri Jul 02, 2010 1:29 pm
- Location: Phoenix AZ
Re: Ashtray side bearings
luke-ao wrote:Can we get a look at the bracket that holds the bearing in place? I have 68 and a 71, both are missing the bearings and the bracket.
Here ya go Luke!
You do not have the required permissions to view the files attached to this post.
Thanks JP! Ms. Cordova is a factory 1969 Ford F100 Ranger with a 390, Front disc brakes, Cordova copper orange, behind the seat box
-
JoshT
- Preferred User
- Posts: 327
- Joined: Sat Oct 10, 2015 11:09 pm
- Location: Middle Georgia
Re: Ashtray side bearings
I'm about to go through fixing mine as well. Was stuck shut until last week, but knocked it out while doing some other stuff under the dash. Though the bearing retainer was gone as well, but someone had wedged it into the top of the ashtray.
The bearing retainer has two little tabs that stick down into the bearing track. When installed would those tabs be towards the front of the truck or rear?
I'll keep a few sets as spares, but got to figure out what to do with the other 80 or so. Think they'd be big enough for sling shot ammo? I don't have a slingshot yet...
The bearing retainer has two little tabs that stick down into the bearing track. When installed would those tabs be towards the front of the truck or rear?
That's what I did, but at Amazon. I think in ended up with 100 for about $10.jp2005 wrote:Well guys Ace was no help wrong sizes. So what I did was type 11/32 bearings into ebay and purchased a pack of 50 for $6.95 now if I lose any I have backups! Hahahajp2005 wrote:Wow! Thanks guys!that's helpful I was calling and posting all day trying to find a place. I also called Ace hardware and they sell individual bearings which I didnt know. I'm going to stop there after work.
Love this website! I'll keep you posted what I find.
I'll keep a few sets as spares, but got to figure out what to do with the other 80 or so. Think they'd be big enough for sling shot ammo? I don't have a slingshot yet...
1968 F-100 4x4 long bed - 360 FE - NP435 w/ Dana 21 - PS & PB conversion - Front Disc Swap - 265/75R16 - 1" S.L. & 2" B.L. (to be removed) - Homemade tube bumpers - Warn 8274 - Currently wearing 1970 body
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Ashtray side bearings
See the first photo. The tabs go to the front.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
JoshT
- Preferred User
- Posts: 327
- Joined: Sat Oct 10, 2015 11:09 pm
- Location: Middle Georgia
Re: Ashtray side bearings
Thanks, completely missed that somehow.
1968 F-100 4x4 long bed - 360 FE - NP435 w/ Dana 21 - PS & PB conversion - Front Disc Swap - 265/75R16 - 1" S.L. & 2" B.L. (to be removed) - Homemade tube bumpers - Warn 8274 - Currently wearing 1970 body
-
jp2005
- Blue Oval Guru
- Posts: 1085
- Joined: Fri Jul 02, 2010 1:29 pm
- Location: Phoenix AZ
Re: Ashtray side bearings
I received my bearings today and 11/32nd fit perfect. Thank you guys for your help once again. I owe you a beer!
Probably like 10 million beers by now!
Probably like 10 million beers by now!
You do not have the required permissions to view the files attached to this post.
Thanks JP! Ms. Cordova is a factory 1969 Ford F100 Ranger with a 390, Front disc brakes, Cordova copper orange, behind the seat box
-
Busboy
- Blue Oval Fanatic
- Posts: 943
- Joined: Sat Jan 24, 2015 9:51 am
- Location: Nampa Idaho
Re: Ashtray side bearings
I prefer anything Michelob. 
1967 F-100 4x4 custom cab.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
-
91Bear
- Blue Oval Fanatic
- Posts: 991
- Joined: Wed Mar 09, 2005 10:31 am
- Location: Texas, San Antonio
Re: Ashtray side bearings
Wouldn't that be to the back, relative to the front and back of the truck?sargentrs wrote:See the first photo. The tabs go to the front.