Can someone please give me info. I was changing out the actuator pin on my 72 F250
part of if fell down the steering col cover. Do I need to take the column apart or will be ok
Thank you
Neutral safety switch actuator pin
Moderator: FORDification
-
BigAl47
- New Member
- Posts: 90
- Joined: Fri Oct 26, 2018 6:45 pm
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Neutral safety switch actuator pin
I'm assuming an automatic transmission? How big a piece and which part of the actuator dropped down in there? The column is a pretty simple design so not much to jam up.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
BigAl47
- New Member
- Posts: 90
- Joined: Fri Oct 26, 2018 6:45 pm
Re: Neutral safety switch actuator pin
Thank you for the reply. Yes it’s an automatic. It was the part that snaps onto the column. I don’t hear anything when you turn the wheel. Just trying to avoid any problems. But if there’s nothing to worry about that’s great