67 F100 rear flange gasket
Moderator: FORDification
-
denco555
- New Member
- Posts: 7
- Joined: Wed Aug 08, 2018 9:31 am
67 F100 rear flange gasket
Doing a seal change and brake rebuild in my 67 truck. The rear end has paper flange gaskets on the backside of the backing plate. The new version of this gasket from the auto parts store is metal, the newer gasket has a slight bump on one side and a slight beveled edge on the other. My question is, which way do I install the new style gasket? Bump side out with the beveled edge in or vise versa?
-
Busboy
- Blue Oval Fanatic
- Posts: 943
- Joined: Sat Jan 24, 2015 9:51 am
- Location: Nampa Idaho
Re: 67 F100 rear flange gasket
It absolutely doesn't matter.
1967 F-100 4x4 custom cab.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.