F100 360 Y pipe Front pipe
Moderators: Ranchero50, DuckRyder
-
Ranger xlt
- New Member
- Posts: 9
- Joined: Tue Feb 20, 2018 10:55 am
F100 360 Y pipe Front pipe
Hi guy's i'm looking for a Y pipe and Front pipe for a 1970 f100 360 engine 2 wheel drive. I found these Walker part numbers. Y pipe #40516 and Front pipe #42371. I found these on the Walker site but lists them for F250 anyone know if these will fit. Is there another make that will work. Thanks for your help
-
Busboy
- Blue Oval Fanatic
- Posts: 943
- Joined: Sat Jan 24, 2015 9:51 am
- Location: Nampa Idaho
Re: F100 360 Y pipe Front pipe
I've used those on my trucks. It seems like their website leaves stuff off but much of it will fit other years.
1967 F-100 4x4 custom cab.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
-
Ranger xlt
- New Member
- Posts: 9
- Joined: Tue Feb 20, 2018 10:55 am
Re: F100 360 Y pipe Front pipe
Thank's Busboy one less thing to look for.
-
colnago
- 100% FORDified!
- Posts: 1882
- Joined: Tue Jun 14, 2011 8:48 pm
- Location: Ridgecrest, CA
Re: F100 360 Y pipe Front pipe
I tried using the Walker stuff on my '67 352, and it definitely did not fit. One of those parts that didn't cross over, I suppose. I ended up having a local shop fab up a system.
Joseph
Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.
-
Busboy
- Blue Oval Fanatic
- Posts: 943
- Joined: Sat Jan 24, 2015 9:51 am
- Location: Nampa Idaho
Re: F100 360 Y pipe Front pipe
They fit perfectly on my 67 f-100 with a 352. I replaced the entire system from manifolds to tail pipe and it worked out perfectly. 
1967 F-100 4x4 custom cab.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
-
colnago
- 100% FORDified!
- Posts: 1882
- Joined: Tue Jun 14, 2011 8:48 pm
- Location: Ridgecrest, CA
Re: F100 360 Y pipe Front pipe
Hmmm, not sure. Maybe it was an F100-vs-F250 thing. I just remember that it didn't fit, and it was a bit of a gamble, because the Walker web site fitment guide didn't specify a '67 F250 with a 352. Or, they've changed their design.. At the time, I shrugged it off, and took the truck to a local shop.Busboy wrote:They fit perfectly on my 67 f-100 with a 352. I replaced the entire system from manifolds to tail pipe and it worked out perfectly.
Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.