F100/250 - 4x2 -factory P/S, '67 - '68 steering shaft & flange - 34 15/16" long - flange has (1) 1 1/2" slot & (1) 3/4" slot part # C9TZ-3524M
above information from the FORDification part numbers page.
steering shaft
Moderator: FORDification
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: steering shaft
Like "pulling hen's teeth"...OldRanger68 » Thu Feb 16, 2017 1:22 pm
F100/250 - 4x2 -factory P/S, '67 - '68 steering shaft & flange - 34 15/16" long - flange has (1) 1 1/2" slot & (1) 3/4" slot part # C9TZ-3524M
above information from the FORDification part numbers page.
I'd expand your search to the entire column and hope for the best.
Or...I DIDN'T SAY THIS KEITH
Go over to the "dark site" and see if numbers dummy can find it for you.
Now where's that fte sucks smile when I need it...
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4