Steering Column with No shifter???

[IN2FORD]

My truck will end up with a 5 or 6 speed in it so I am going to need a column without a shifter. But it does not seem that there were no columns built without a shifter. What's my option??

Barry

[sykanr0ng]

The 4 speed trucks were all floor shift and had no column shifter.

In later models the 4 speed and 5 speed manual transmissions are not column shift either.

Look for a donor truck that started out with a more than 3 speed manual transmission.

[sargentrs]

I don't see where this was 100% confirmed but I think the Mustang shift collar will work in our trucks. http://www.fordification.com/forum/view ... =5&t=74516 Also check with BroncoGraveyard as mentioned in the thread. Bronco's came with floor shift and smooth columns too.

[mw2158]

Where are you located, I have a power steering column from a 70 that has no hole in the shift collar (floor shift).

[IN2FORD]

Where are you located, I have a power steering column from a 70 that has no hole in the shift collar (floor shift).

I am located in TN. Willing to ship? Not sure what it would cost.

Barry

[thejunkman]

Is your truck manual or power steering. The lengths of the steering shaft vary depending, from what I'm told. I could not find a floor shift manual steering column for mine. So I had to improvise. Just make sure you verify column lengths before laying down cash.

[IN2FORD]

Mine is a power steering column

Barry

[Calfdemon]

This is the "add power steering" tech article, but it has the differences in the columns noted with pictures that you want to be aware of... http://www.fordification.com/tech/powersteering.htm

[jamesingarage]

PM sent

[DIXONBOY]

The paige Keith made for the power steering swap is very well done. I took the power steering out of my 67 and put it on my 65 and had no isues what so ever due to his write up. Thanks Keith!!