What is the right way, original way, other ways you all have tried or failed at?
Drip rails
Moderator: FORDification
-
doughboy68
- New Member
- Posts: 81
- Joined: Fri Jul 05, 2013 1:06 pm
- Location: Okeechobee, FL
Drip rails
I am working on grinding the 45 year old crap out of the drip rails... what is the right way to seal them? I was talking to a buddy who used a solder body filler to do it. I do have a couple holes to fill in???
What is the right way, original way, other ways you all have tried or failed at?
What is the right way, original way, other ways you all have tried or failed at?
-
tac
- Preferred User
- Posts: 443
- Joined: Mon Jun 03, 2013 10:50 am
- Location: Dallas/Ft. Worth
Re: Drip rails
They have seem sealer in them. A heat gun and scrape it it out with a narrow flat blade and wire brush. I would take it to the metal, epoxy prime and use good automotive seam sealer.