Now i know that this isn't necessarily a bumpside related thing but i am searching high and low right now for a stone dresser for my kwik way valve seat grinder. it's a old model sg with a .625" pilot size. does any body know where i could find either that or any kwik way stone dresser with a matching stone mandrel? any help is greatly appreciated.
-Sam
cylinder head tooling
Moderator: FORDification
-
samericsson67
- New Member
- Posts: 64
- Joined: Mon Jan 30, 2012 8:14 pm
- Location: Harleysville, PA
-
Art
- New Member
- Posts: 195
- Joined: Thu Jan 24, 2008 1:29 pm
- Location: SE Wisconsin
Re: cylinder head tooling
I would check on ebay first.
Can you use the more popular stone dresser for the .385 pilot and sleeve it up to .625???
Can you use the more popular stone dresser for the .385 pilot and sleeve it up to .625???
owner of several 67-72 as well as 73-79 Ford trucks
Wanted: Parts for my 1930 Dodge coupe project - the DD model was built in 1930 and 1931
Like vintage drag racing? http://www.meltdowndrags.com
Wanted: Parts for my 1930 Dodge coupe project - the DD model was built in 1930 and 1931
Like vintage drag racing? http://www.meltdowndrags.com