Restoring a 72 F 250

Moderator: FORDification

Post Reply
jamesabel
New Member
New Member
Posts: 3
Joined: Mon Nov 04, 2013 7:50 pm

Restoring a 72 F 250

Post by jamesabel »

I am restoring 72 f 250 Ranger 2WD with MT on the floor. Previous owner put in a seat from a F 350 which does not fit. Looking for bench seat in good condition with mounting hardware. Would also like to keep everything original by finding a original steering wheel and horn button (all black). I am located 2 hours NE of Las Vegas.
User avatar
Abrams
New Member
New Member
Posts: 181
Joined: Wed Nov 20, 2013 9:32 pm
Location: San Jose, CA

Re: Restoring a 72 F 250

Post by Abrams »

Hey, hope your restoration is going well. I just came across two 1972 F250 camper specials in the local yard.
You still looking for parts? one of them does have the black leather interior but its pretty beat up.
Regards
A
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Re: Restoring a 72 F 250

Post by fordman »

i have a 72 steerign wheel. its cracked just liked all used ones are. it can be restored. i have been too lazy to do it. i also have the outer cover for it. the inner guts seem to almost always be bad.
cfassett87
New Member
New Member
Posts: 39
Joined: Mon Aug 29, 2011 11:48 am
Location: Hartsville, SC

Re: Restoring a 72 F 250

Post by cfassett87 »

Got a pair of original front side emblems / reflectors. let me know if you're interested.
'69 Shortbed F100
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Re: Restoring a 72 F 250

Post by fordman »

for some reason the steerign wheel pics got deleted without getting from my phone to my email address. here are pictures of the horn pad cover. it has some silver paint on the edges of it. but wont be that noticeable. all the tabs are there to hold it to your horn button board underneath. the pictures are kind of dark and hard to see any detail. i need to install my camera software on this computer. if i even have the software.
You do not have the required permissions to view the files attached to this post.
Post Reply