I'm about ready for a set of sport bumpers for my truck, but I'm not sure of what route to take? I know I can buy aftermarket bumpers from DC, Lmc,etc... but I'm leery of the quality.
I checked on a local chrome shop to straighten/re-chrome my bumpers and I think the price will be close (maybe a little more) than that of the aftermarket bumpers.
Basically, what are you guys experience with the aftermarket stuff or should I have what I've got re-chromed?
Thanks, Cole
Aftermarket bumper quality from DC/Lmc...etc?
Moderator: FORDification
-
- Preferred User
- Posts: 442
- Joined: Tue Aug 02, 2011 11:27 pm
- Location: Tallapoosa, Georgia
- HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: Aftermarket bumper quality from DC/Lmc...etc?
Repro bumpers seem to made of thinner gauge metal and the chrome looks fuzzy. I recommend rechroming the originals. That way, you can control the quality instead of settling on whatever arrives in the big brown truck.
70 F100 LB 2WD, 360FE, E-Street EFI, TKO-500, 76K original miles.. follow my rebuild: The Lo-Buck Bumpside
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
-
- Blue Oval Fan
- Posts: 663
- Joined: Sat Aug 20, 2011 3:05 am
- Location: Seattle Washington
Re: Aftermarket bumper quality from DC/Lmc...etc?
The cheap replacement bumpers are really light and thin...easy to distort around the 4 mounting bolt heads when cinched down. Mine also had ripples, not a very good stamping.
I once stuck my head out the window while driving to see what was making the buzzing noise, elcheapo bumper was actually flapping around in the wind...
-
- Preferred User
- Posts: 442
- Joined: Tue Aug 02, 2011 11:27 pm
- Location: Tallapoosa, Georgia
Re: Aftermarket bumper quality from DC/Lmc...etc?
Thanks fellas, re-chroming it is.
My build thread...http://www.fordification.com/forum/view ... 22&t=67317