or where a cheap place to buy a pair.
the cheapest ive found them is for $60-70 before shipping.
they just seam so simple that i feel i could make some cheaper and better qualuity.
any advice would be
Fabricating core support bushings
Moderator: FORDification
-
Craigerf100
- Blue Oval Guru
- Posts: 1125
- Joined: Fri Dec 21, 2012 2:11 am
- Location: MO Ozark (Near Springfield MO)
Fabricating core support bushings
Hey guys i was just wondering if anyone has attemped to fab there own core support bushing/mounts? if so how, and how thick is (atleast) the top bushing?
or where a cheap place to buy a pair.
the cheapest ive found them is for $60-70 before shipping.
they just seam so simple that i feel i could make some cheaper and better qualuity.
any advice would be
or where a cheap place to buy a pair.
the cheapest ive found them is for $60-70 before shipping.
they just seam so simple that i feel i could make some cheaper and better qualuity.
any advice would be
1964 F-100 Custom Cab Short Bed
1968 F-100 Short Bed
1967 Fairlane 500 Convertable
1967 Fairlane GT/A 289ci SOLD
1950 F-1 Original 239ci Flat Head V8 SOLD
1995 f-150 4x4 Swb 4.9L 5-speed FORSALE
My Build:
http://www.fordification.com/forum/view ... &sk=t&sd=a
1968 F-100 Short Bed
1967 Fairlane 500 Convertable
1967 Fairlane GT/A 289ci SOLD
1950 F-1 Original 239ci Flat Head V8 SOLD
1995 f-150 4x4 Swb 4.9L 5-speed FORSALE
My Build:
http://www.fordification.com/forum/view ... &sk=t&sd=a-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Fabricating core support bushings
You can buy a complete set of polyurethane cab mount and radiator support, bushings only, for about that much. Were you able to salvage your washer tubes/hardware?
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
Craigerf100
- Blue Oval Guru
- Posts: 1125
- Joined: Fri Dec 21, 2012 2:11 am
- Location: MO Ozark (Near Springfield MO)
Re: Fabricating core support bushings
yeah i found a set on ebay for $50. some all the washers and one bolt. i may just go that rout.
1964 F-100 Custom Cab Short Bed
1968 F-100 Short Bed
1967 Fairlane 500 Convertable
1967 Fairlane GT/A 289ci SOLD
1950 F-1 Original 239ci Flat Head V8 SOLD
1995 f-150 4x4 Swb 4.9L 5-speed FORSALE
My Build: http://www.fordification.com/forum/view ... &sk=t&sd=a
1968 F-100 Short Bed
1967 Fairlane 500 Convertable
1967 Fairlane GT/A 289ci SOLD
1950 F-1 Original 239ci Flat Head V8 SOLD
1995 f-150 4x4 Swb 4.9L 5-speed FORSALE
My Build:
http://www.fordification.com/forum/view ... &sk=t&sd=a-
cep62
- 100% FORDified!
- Posts: 2073
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: Fabricating core support bushings
http://www.4wd.com/Jeep-Body-Parts-Roll ... pn=MDR5000
this is a log with a pre drilled hole that can be cut to length.
It is used for fiberglass jeep body install kits.
this is a log with a pre drilled hole that can be cut to length.
It is used for fiberglass jeep body install kits.
-
Craigerf100
- Blue Oval Guru
- Posts: 1125
- Joined: Fri Dec 21, 2012 2:11 am
- Location: MO Ozark (Near Springfield MO)
Re: Fabricating core support bushings
awesome thanks
1964 F-100 Custom Cab Short Bed
1968 F-100 Short Bed
1967 Fairlane 500 Convertable
1967 Fairlane GT/A 289ci SOLD
1950 F-1 Original 239ci Flat Head V8 SOLD
1995 f-150 4x4 Swb 4.9L 5-speed FORSALE
My Build: http://www.fordification.com/forum/view ... &sk=t&sd=a
1968 F-100 Short Bed
1967 Fairlane 500 Convertable
1967 Fairlane GT/A 289ci SOLD
1950 F-1 Original 239ci Flat Head V8 SOLD
1995 f-150 4x4 Swb 4.9L 5-speed FORSALE
My Build:
http://www.fordification.com/forum/view ... &sk=t&sd=a