ford throttle linkage 300

gregamorton · Post by **gregamorton** » Mon Apr 01, 2013 9:39 pm

guys on my 1971 crewcab i swapped in a 300 and missing pieces from factory throttle linkage. I have the two throttle rods and the swivel base. There seams to be a threaded rod that must go in and bolt to intake or somewhere to keep swivel part stationary. I need help with parts or if there is a pic of factory setup to go by. Thanks for help in advance!

1364163682411.jpg

rmurphy · Post by **rmurphy** » Wed Apr 03, 2013 9:19 am

Let me look I may have it. If it's what I think, there's a rod and bracket that bolts to the firewall.

gregamorton · Post by **gregamorton** » Wed Apr 03, 2013 1:51 pm

yea it that part. I was just thinking about welding up the triangular part so it wont move and that would work. cant figure out why they would do it this way unless it can bind up some how!

gregamorton · Post by **gregamorton** » Wed Apr 03, 2013 2:08 pm

sir I went and looked at my firewall and there is no factory holes so I will weld my piece up to make work. Thanks for checking on it for me though,

The FORDification.com Forums

ford throttle linkage 300

ford throttle linkage 300

Re: ford throttle linkage 300

Re: ford throttle linkage 300

Re: ford throttle linkage 300